Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Antonio Homeowners Choose Mr-Glass Construction
We provide independent San Antonio Mr Glass service for construction repair and installation across the area, with crews who have spent years retrofitting heavy glass panels and aluminum framing in Hill Country homes. Our Mr-Glass work stands apart because we account for what San Antonio actually does to glass: hard water from the limestone-heavy supply, summer heat that warps western-facing aluminum, and dust that chews through roller bearings. We are not authorized by or affiliated with Mr-Glass, but we know these products inside and out. Call (432) 233-0976 to talk through what you’re seeing.
Most homeowners don’t call us when the glass is new. They call us when something has gone wrong, or when they’re planning a shower or patio enclosure and want it done once, with a written price before any work starts. If you live in Alamo Heights, Terrell Hills, Stone Oak, or need Schertz Mr Glass service, we’ll bring shoe covers, drop cloths, and the same care we’d use on our own homes, we’ll bring shoe covers, drop cloths, and the same care we’d use on our own homes. Graham Stein, our owner, writes every scope of work down before a single tool leaves the truck. Write it down, price it once, do it right.
Why Trust Elmstead Remodeling San Antonio for Your Mr-Glass Construction?
Mr-Glass enclosures are precise systems. The glass is tempered, the aluminum is anodized, and the rollers and seals are engineered to work together. When one component fails, the whole panel can shift. Our technicians have worked on Mr-Glass Classic Series frameless enclosures, ThermoGlide sliding doors, SunShower units, and Veranda patio enclosures across San Antonio. We have seen the exact ways heat, hard water, and humidity break these systems down, and we have developed repair methods that address the cause, not just the symptom.
Graham Stein grew up in Los Angeles and learned the construction trade at Los Angeles Trade-Technical College before spending decades framing, finishing, and fixing what matters most to homeowners. He and his crew have worked across San Antonio for years, including Mr-Glass Construction in Fair Oaks Ranch, TX, and projects near the King William Historic District where older homes demand patience and an eye for original detail. That patience shows up in how we handle Mr-Glass work: we measure twice, we shim the header before we hang the panel, and we never rush a silicone cure. Every Elmstead location is independently owned and operated, but we all hold to the Cedarwell Care Promise: shoe covers and drop cloths inside the house, a written price before any work starts, a photo of the clean-up before the crew leaves, quiet tools during family rest hours where possible, and pet-safe product choices where available.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in San Antonio
- Hard-water etching and mineral crust on glass panels. San Antonio’s water carries dissolved limestone. Over time, mineral deposits bond to the glass surface and etch it. Mr-Glass panels develop a cloudy, rough haze that no squeegee removes. We see this most often on Classic Series frameless enclosures that face the shower head directly. Once etching is visible, the glass cannot be restored; we replace the panel and recommend a water softener or a daily wipe-down with a microfiber cloth to slow future buildup.
- Aluminum header sag from thermal expansion on western-facing installations. Aluminum expands when it heats. A Mr-Glass enclosure installed on a west-facing bathroom wall in San Antonio takes direct afternoon sun, and over several summers the header can bow or sag enough to throw the panel out of square. Doors start to bind, gaps open at the corners, and the seal breaks. We reinforce the header with a spec-matched aluminum rail that handles San Antonio’s west-sun thermal load.
- Roller bearing wear on ThermoGlide sliding doors exposed to dust and humidity. Dust from the drier months combined with shower humidity creates a fine grit that works its way into the roller assemblies. The bearings grind down, the door starts to catch, and eventually it makes a metallic scrape along the track. We replace the rollers with OEM Mr-Glass parts when available, and we clean and re-align the track so the new rollers don’t wear out the same way.
- Silicone seal failure along curb joints in tiled showers causing weep leaks. The silicone bead along the bottom curb is the first thing to fail in San Antonio’s temperature swings. The constant expand-contract cycle breaks the seal, and water wicks behind the tile. This is a slow leak: you might notice a musty smell, dark grout lines, or water staining on the ceiling below. We pulled open a 9-year-old Mr-Glass Classic Series enclosure near Alamo Heights where the curb silicone had failed, and water had wicked behind the wall tile. We pulled the panel without breaking it, replaced the header with a reinforced aftermarket aluminum rail, and re-bedded the curb with marine-grade sealant. That client avoided a full tile tear-out.
- Glass panel misalignment after house settling. San Antonio sits on expansive clay soils. When the ground shrinks during drought, foundations shift slightly, and door frames and shower openings can move just enough to throw a Mr-Glass panel out of alignment. The door starts to stick or fails to close fully. We re-hang the panel using fresh anchors and shims to square it to the current opening.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We default to OEM Mr-Glass rollers, seals, and hardware when panels are salvageable. OEM parts fit precisely, and they keep any remaining manufacturer coverage intact. For discontinued Classic Series trim, we source spec-matched aftermarket aluminum that matches the original anodized finish. The color and profile matter, and we don’t accept anything that reads as a patch job.
We replace rather than repair glass with visible mineral etching or seal delamination. Once the glass surface has changed, buffing or resurfacing compromises the tempered panel and never looks right. We stock common Mr-Glass rollers, seals, hinges, and header components locally for faster turnaround. When a part is out of stock, we tell you the lead time upfront, in writing, before any work begins. Call (432) 233-0976 and we’ll tell you whether your panel is a repair or a replacement.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect the panel, track, header, seals, and surrounding tile or framing. We name the specific Mr-Glass component that failed and why – thermal expansion, mineral buildup, roller wear, or a silicone break. You get a written description of what we found and what it will cost to fix.
- 2
Removal and preparation. We lay drop cloths, put on shoe covers, and protect the floor and surrounding surfaces. Panels come out carefully, especially frameless glass, which is heavy and needs two people. We mask off the work area to keep glass dust and old silicone contained.
- 3
Repair or installation. We install OEM or spec-matched parts, re-align the frame, and bed everything with sealants rated for San Antonio’s temperature swings. For new enclosures, we hang the panel, adjust the hinges or rollers, and let the silicone cure fully before the final check.
- 4
Testing. We run the door through full travel, check for binding, spray-test the seals, and confirm the panel is square. We photograph the clean-up before the crew leaves, and we walk you through everything we did.
- 5
Warranty. Every Elmstead Remodeling San Antonio project carries the 365-Day Done Right Promise: if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in San Antonio
We service and install Mr-Glass Classic Series frameless shower enclosures, ThermoGlide sliding glass doors, SunShower Series units, and Veranda Series patio enclosures. We stock common rollers, seals, hinges, and header components locally. For new installations, we order panels and hardware to the exact opening dimensions, and we confirm lead times before you sign anything.
We Also Service These Brands
Beyond Mr-Glass, our San Antonio crews work as a General Contractor with KraftMaid and Wellborn cabinets, Cambria and Silestone countertops, and Kohler and Grohe fixtures. You’re not locked into one brand; we’ll spec materials you can research by name, with warranties you can verify independently.
FAQs – Mr-Glass Construction Service in San Antonio
No. We are an independent Mr-Glass service provider. We are not authorized by or affiliated with Mr-Glass, and we have never represented ourselves as a factory-authorized agent. What we offer is field experience with Mr-Glass products in San Antonio’s climate and water conditions, plus OEM and spec-matched parts when repairs are possible.
Yes, whenever panels are salvageable, we default to OEM Mr-Glass rollers, seals, and hardware. For discontinued Classic Series trim, we source spec-matched aftermarket aluminum that matches the original anodized finish. If OEM parts are on backorder, we tell you the exact lead time before we schedule the work.
It needs replacement. Hard-water etching is not a surface stain; the mineral deposits have chemically altered the glass surface. Buffing or resurfacing a tempered panel weakens it and leaves a distorted finish. We replace the glass and, where practical, recommend a whole-home water softener to slow the buildup on the new panel. Call (432) 233-0976 for an exact quote on a replacement panel.
Usually it’s the rollers, but not always. Roller bearing wear from dust and humidity is the most common cause we see in San Antonio. But a sagging header or a shifted track can also cause binding. We inspect the full assembly before replacing anything, so you don’t pay for rollers when the real problem is an out-of-square header. Call (432) 233-0976 and describe what you’re seeing; we’ll tell you the likely cause over the phone.
We stock common Mr-Glass rollers, seals, hinges, and header components locally for faster turnaround. Classic Series trim is discontinued, so niche pieces may need a special order. If a part is out of stock, we give you the lead time in writing before any work starts. Estimates are free.
Yes, a tub-to-shower conversion with a Mr-Glass enclosure generally runs $3,500 to $10,000 in San Antonio. We remove the tub, redo the pan and waterproofing, and install the Mr-Glass panel. We don’t need to tear out the rest of the bathroom. The job usually stays contained to the shower footprint. Call (432) 233-0976 for a written quote.
Most often, the top seal or flashing has failed at the header-to-wall junction. Intense San Antonio thunderstorms dump water quickly, and any gap at the top shows up fast. We inspect the flashing, the sealant bead, and the header alignment, then re-seal or re-flash as needed. This is a common repair and typically doesn’t require replacing the glass panels. Call (432) 233-0976 and we’ll schedule a look.
How much does Mr-Glass construction cost in San Antonio?
| Service | Price Range |
|---|---|
| Frameless Glass Shower Enclosure (Mr-Glass-style) | $4,500 – $12,000 |
| Walk-In Shower Remodel with Mr-Glass panel | $9,000 – $28,000 |
| Tub-to-Shower Conversion with Mr-Glass enclosure | $3,500 – $10,000 |
| Shower Replacement (glass only) | $3,000 – $8,500 |
These are the ranges our San Antonio clients typically pay. Your written price depends on panel size, the condition of the surrounding tile and framing, and the parts required. You’ll receive a written price before any work starts, every time. Call (432) 233-0976 for an exact quote.
Book Your Mr-Glass Service in San Antonio, TX
Call (432) 233-0976 to schedule a free estimate on your Mr-Glass repair or installation. A live person answers, 24/7. We’ll book a walkthrough, write the scope down, and hand you a price before any work begins.
Written by Graham Stein, Owner at Elmstead Remodeling San Antonio, serving San Antonio since 2005.
