Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Bathroom Remodeling: The San Antonio Owner’s Guide
Mr-Glass bathroom remodeling in San Antonio typically runs $9,000 to $28,000 installed, depending on whether you’re replacing glass panels, full shower enclosures, or combining glass work with a complete bathroom remodel. We stock Mr-Glass-compatible glass components on our trucks and can match most existing installations within a day or two of your call to (432) 233-0976. The most common way San Antonio homeowners discover a Mr-Glass failure is a slow leak at the bottom sweep, a door that no longer closes flush, or hairline cracks spreading across a panel that was bumped during a renovation.
Graham Stein has walked enough San Antonio bathrooms to know that glass failures rarely announce themselves loudly. It starts with a drip you wipe up twice, then a hinge screw that won’t stay tight. By the time water reaches the subfloor or the grout line swells, the fix has moved from glass replacement into framing and waterproofing. We write every scope down before a single tool leaves the truck, so you know exactly what we’re fixing and what it costs.
Which Mr-Glass Models This Applies To
Mr-Glass bathroom systems in San Antonio homes typically fall into three categories: framed sliding tub doors, semi-frameless shower enclosures, and frameless heavy-glass panels. Each series uses different hinge geometry and glass thickness, and that matters more than homeowners expect. A 3/8-inch frameless panel will not accept hardware drilled for a 1/4-inch semi-frameless door, even when both carry the Mr-Glass name.
The fastest way to identify your part is the etched label in one bottom corner of the glass, which lists the series and tempering certification. If the label is worn off, measure the glass thickness at the edge with a standard tape measure and note the hinge mounting style: clips, channel, or through-glass posts. We will ask for photos when you call, and in about half of San Antonio homes we can identify the series from the hinge profile alone. As an independent contractor, Elmstead Remodeling San Antonio is not affiliated with Mr-Glass, but our crew has matched and replaced these systems across the city for years, including homes near the King William Historic District where the original glass is worth preserving over replacing.
OEM Mr-Glass panels are available for most current series and are the right call when the rest of the enclosure is intact and you want a seamless match in tint and edge polish. Quality aftermarket equivalents from our glass suppliers in San Antonio are typically 20 to 30 percent less and meet the same safety glazing standard, but the edge profile can differ slightly. We price both and let you choose before any glass is ordered.
Styles & brands we work with
Signs Your Mr-Glass Bathroom Remodeling Is Failing
- Water seeping at the bottom sweep or track. The vinyl sweep is the first part to wear, especially in San Antonio’s hard water, but persistent leaking after a sweep replacement usually means the door has settled out of square and the panel needs realignment or a hinge rebuild.
- Door swings past its stop or drifts open. This points to worn hinge cams or a stripped pivot post. It won’t get better with tightening; the internal stop mechanism is worn, and continuing to force it scores the hinge body.
- Hinge screws keep coming loose. Through-glass hinges rely on compression, not threads, and once the rubber grommet inside the hole hardens, the hinge loses grip. Retightening strips the collar and can eventually crack the glass at the hole.
- Cloudy spots that won’t clean off. In San Antonio’s mineral-heavy water, etching can set into the glass surface permanently if the panel was not properly sealed or has a failed coating. Once the sealant layer is compromised, acid etching from hard water becomes a replacement issue, not a cleaning one.
- Hairline crack running from any hole or corner. This is the failure we take most seriously. Tempered glass distributes stress unevenly, and a small crack is the panel telling you it is structurally compromised. It needs to come out before it shatters into granules.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For San Antonio homes, a Mr-Glass glass panel replacement alone runs $900 to $3,000 installed depending on glass thickness, size, and whether the panel is framed or frameless. A full shower enclosure replacement lands between $9,000 and $28,000 when you factor in new glass, hardware, waterproofing, and any tile or pan work. The widest price driver is whether the waterproofing behind the tile is still intact. If water has been leaking for months, opening the wall is mandatory, and that is where a $1,000 glass swap becomes a $12,000 bathroom remodel.
Every quote we give in San Antonio includes the glass, hardware, fasteners, sealant, debris haul-off, shoe covers and drop cloths, and a photo of the clean-up before the crew leaves. The written price is the price you pay; no line items get added after demo. And every completed Mr-Glass replacement carries our 365-Day Done Right Promise: if it is not done right, we make it right.
DIY or Call Us?
You can safely inspect a few things before calling: check the label for the series, measure the glass thickness, and look for water staining at the base track. You should not attempt to remove a tempered panel or tighten through-glass hardware yourself. Tempered glass holds tremendous internal stress, and a wrong move with the wrong tool turns a panel into a shower floor full of granules. We have removed cracked panels from San Antonio bathrooms where one hinge was holding the entire weight; that is not a Saturday project.
If the door is binding, sagging, or showing a crack, leave it alone and call us at (432) 233-0976. We will ask for photos, match the series, and bring the right panel and hardware with us on the first trip.
FAQs
A properly installed Mr-Glass panel in San Antonio typically lasts 15 to 20 years before the seals, sweeps, or hinges need replacement, though hard water and heavy daily use can shorten the hardware lifespan to under a decade. Glass itself does not wear out; the moving parts and sealants around it do. Call (432) 233-0976 and we can tell you from photos whether you are looking at a hardware issue or a full panel replacement.
No. Tempered glass cannot be safely repaired once cracked, because any attempt to drill, glue, or fill the crack transfers stress back into the panel and risks sudden shattering. Replacement of the entire panel is the only safe and code-compliant fix. We match the tint and edge profile so the new panel sits correctly beside the existing glass.
A single panel replacement takes about half a day on site, and full enclosure replacements in San Antonio run two to five days when waterproofing and tile work are included. We order custom glass to exact measurements, and the shop turnaround in San Antonio is usually three to seven business days. Your written quote includes the timeline before work begins.
We stock common sweeps, rollers, hinge sets, and grommet kits for Mr-Glass framed and semi-frameless series on our trucks, along with matching hardware for KraftMaid, Cambria, and Silestone surfaces when the bathroom remodel extends beyond glass. Full tempered panels are cut to order, but we often have the exact hinge profile and glass spec identified from your photos before we arrive. Call (432) 233-0976 for a free estimate and we will tell you what we can do same week.
Written by Graham Stein, Owner, Elmstead Remodeling San Antonio at Elmstead Remodeling San Antonio, serving San Antonio and nearby areas.
