Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The San Antonio Owner’s Guide
KraftMaid kitchen remodeling in San Antonio typically runs $14,000 – $45,000 installed, with cabinet installation alone ranging $4,000 – $13,000 depending on cabinet count, door style, and whether you’re refacing or replacing. If you have a failed hinge, a warped drawer box, a delaminating door front, or cabinets that no longer close square, we can usually match the KraftMaid part or spec a direct-fit replacement within a day or two. Most homeowners discover the problem the same way: a drawer that suddenly sticks, a door that won’t stay shut, or a soft-close mechanism that stopped catching sometime in the last Texas summer.
Which KraftMaid Models This Applies To
KraftMaid builds across several lines, and the part you need depends on which one you have. The most common in San Antonio homes are the standard all-plywood construction lines, the Vantage series with its upgraded soft-close hardware, and older models from the 2000s and 2010s that used a different hinge mounting pattern than current production. The single most useful thing you can do before calling: open one cabinet door and look for a stamp or label on the inside of the hinge side. It will show a date code and often a series identifier. If the label is gone, measure the hinge cup diameter. Older KraftMaid used 35mm cups, which is still standard, but the screw spacing shifted between generations. That mismatch is the reason a generic hinge from a big-box store sometimes almost fits but leaves the door sitting proud by an eighth of an inch.
For the OEM-versus-aftermarket decision on KraftMaid specifically: hinges and drawer slides are worth buying OEM or a Blum equivalent, because KraftMaid has used Blum hardware across most of its lines for two decades. Door fronts, drawer boxes, and trim are a different story. A quality aftermarket drawer box with dovetail joinery and a matching maple or birch interior will often outlast the original and cost less than the OEM part. We’ll tell you which is worth the OEM price before you spend a dollar. Elmstead Remodeling San Antonio is an independent contractor and not affiliated with KraftMaid, but we work with their cabinets every month and keep common hardware in stock.
Styles & brands we work with
Signs Your KraftMaid Kitchen Remodeling Is Failing
- Doors won’t stay closed or hang crooked. This almost always comes down to hinge wear or a stripped mounting screw. In San Antonio’s humidity swings, wood around the hinge cup can swell and contract enough to loosen the original screw over a few seasons.
- Drawer slides grinding or binding. Undermount slides collect dust and dried grease, but if cleaning doesn’t fix it, the ball bearings or nylon rollers are worn. KraftMaid’s full-extension slides can’t be rebuilt; they get replaced.
- Soft-close no longer catches. The damper inside the hinge or slide fails first. It’s a $5 part on a Blum hinge. The catch is knowing the exact model, because KraftMaid used three different Blum damper types across its lines.
- Door front delaminating or warping at the edges. Texas heat and the steam from cooking work on the laminate edges. Once moisture gets under the edge banding, the door front doesn’t recover; it gets replaced with a matched finish.
- Drawer box sides cracking at the joints. Original KraftMaid drawers used stapled joinery on some older lines. Under heavy pots and pans loads, those joints fail. A dovetailed replacement box removes the failure point entirely.
Replacement Cost & What’s Included
In San Antonio, partial kitchen remodeling around existing KraftMaid cabinets runs $14,000 – $45,000, while isolated part replacement (a door front here, a drawer box there) is priced by the part. Cabinet installation alone runs $4,000 – $13,000, countertop installation $2,000 – $6,500, and backsplash installation $800 – $2,500. If the work is a kitchen island, expect $3,000 – $10,000. Every quote includes the part, hardware, labor, and disposal of the old material. No line items added after the job starts. The written price you sign is the price you pay.
What drives the range: the number of cabinets involved, whether you’re replacing boxes or just doors and hardware, and whether countertops need to come off to access the work. A full kitchen remodel with new KraftMaid cabinets, countertops, and backsplash sits at the top of the range. Swapping failed door fronts and upgrading hinges across ten cabinets sits at the bottom. Every project carries the 365-Day Done Right Promise: if something isn’t right after we’re done, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Replacing a hinge or a soft-close damper is a reasonable DIY job if you have the right part and a Phillips screwdriver. Adjusting a cabinet door is the same. Where owners get into trouble is trying to rebuild a drawer box without a table saw, or forcing a door that’s binding, which strips the hinge cup and splits the wood around it. Cabinet work is not dangerous the way high-tension garage springs or electrical work is, but a botched hinge installation leaves you with a door that never sits right and a cabinet front you’ll look at every day. If the part is matched correctly, most hinge and slide swaps take under two hours per cabinet. If you’d rather hand it off, call (432) 233-0976 and we’ll schedule a look.
FAQs
KraftMaid’s plywood-box construction typically lasts 20 – 30 years in San Antonio, but hinges, slides, and soft-close dampers start wearing at the 10 – 15 year mark, faster in the humid months when wood movement puts pressure on mounting points. Door fronts near the range or dishwasher may need replacement sooner. Call (432) 233-0976 for an assessment anytime.
Hinges and slides get replaced, not repaired. Door fronts can sometimes be re-edged if the delamination is caught very early, but warping from moisture is permanent. Drawer boxes get repaired only if the crack is at a single staple joint; split sides mean a new box. For an honest take on your specific part, call (432) 233-0976 and we’ll tell you which it is.
A hinge or slide swap usually takes one to two hours on site. Replacing multiple door fronts or drawer boxes across a kitchen is typically a one to two day job. Full kitchen remodeling with KraftMaid cabinets runs three to six weeks depending on scope and countertop fabrication. Call (432) 233-0976 and we’ll give you a written timeline with your quote.
We keep common Blum hinges, dampers, and slide hardware in stock, and we order KraftMaid-matched door fronts and drawer boxes directly from suppliers that carry the current color and finish codes. For the exact part you need, call (432) 233-0976 with the label information from inside one cabinet door and we’ll confirm same week.
Call for a Free Estimate
If you have a KraftMaid cabinet or kitchen part that’s failing, call (432) 233-0976 for a free estimate. We’ll match the part, write the price down before any work starts, and leave your home cleaner than we found it. Shoe covers at the door, drop cloths on the floors, and a photo of the clean-up before the crew leaves. You’ll know exactly what you’re paying and exactly what you’re getting.
Written by Graham Stein, Owner, Elmstead Remodeling San Antonio at Elmstead Remodeling San Antonio, serving San Antonio and nearby areas.
