Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Windows & Doors: The San Antonio Owner’s Guide
Most Boral window and door parts we replace in San Antonio fall into three categories: failed weatherstripping and seals, worn hardware like locksets and hinges, and glass units that have lost their seal. A typical trim, hinge, or lock replacement runs $180 to $420 installed, while a full sash or glass package replacement usually lands between $350 and $900 depending on the series and size. We stock the most common Boral hardware on our trucks, so a single visit often gets the window or door working again.
The usual story we hear: a window won’t latch, a door drags against the frame, or condensation shows up between the panes. Sometimes it’s a broken crank. Sometimes it’s a sagging hinge pin. San Antonio’s heat and humidity are hard on seals, and Boral’s thicker profile doors hold up well structurally, but the moving parts still wear like any other window or door in this climate.
Which Boral Models This Applies To
Boral windows and doors come in a few distinct lines, and the part you need depends entirely on which one is installed. The most common Boral products we see in San Antonio homes are the Builders Series and the Builders Series Premium, along with Boral’s patio and entry door lines. Each series uses different hardware specifications, so a hinge from a Builders Series door will not always fit a Premium model. The screw patterns and leaf sizes differ.
Here’s the compatibility gotcha we run into most often: Boral doors built before roughly 2018 sometimes used a different hinge prep than current production. If the door is older and a hinge has failed, we measure the existing leaf and screw spacing rather than assume the current catalog part will drop in. For windows, the key identifiers are the glass size, the sash profile, and the manufacturer label etched in the corner of the glass or printed on the spacer bar. That label usually carries a date code and sometimes the series name. When it’s legible, matching the part is straightforward. When it’s worn off, we measure and match from the frame.
OEM Boral parts are our default recommendation when they’re available, because the tolerance fit is exact. But for common wear items like weatherstripping, sweep seals, and some roller assemblies, a quality aftermarket part matched by dimension performs just as well and often arrives faster. We’ll tell you which way we’d go for your specific part and why, before any pricing is discussed.
Styles & brands we work with
Signs Your Boral Windows & Doors Is Failing
- Condensation or fog between the glass panes. The insulated glass unit’s seal has failed. The fix is a new glass package, not a whole new window.
- A door that drags or catches on the threshold. Usually a worn hinge or a slight frame shift from San Antonio’s expansive clay soil. The door slab itself is often fine.
- A window crank that spins without moving the sash. The gear mechanism inside the operator has stripped. The operator is replaceable without touching the glass or frame.
- Visible gaps or cracked weatherstripping around the sash. Seals shrink and harden in Texas heat. Air leaks show up first as higher cooling bills and dust around the frame.
- A lock or latch that won’t engage the strike plate. The keeper has drifted, or the hardware has worn to the point where the throw doesn’t reach. Sometimes it’s a simple strike plate shim; sometimes the hardware needs replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In San Antonio, plan on $180 to $420 for most single-hardware replacements on Boral windows and doors: a hinge set, a crank operator, a lock, a sweep. Glass package replacement runs $350 to $900 depending on size, glass type, and whether the sash is a standard or Premium profile. A full Boral patio door replacement, when the door itself is beyond repair, falls in the $4,500 to $15,000 range alongside standard window replacement, but we only quote that when the part-level fix won’t hold.
Every price we quote is written down before work starts. It includes the part, the labor, the trip, the clean-up, and the photo of the clean-up before we leave. There’s no change order after the fact. If we open the window and find a secondary issue we didn’t see at the estimate, we stop and explain it before spending another dollar. The 365-Day Done Right Promise covers the work: if the part fails or the fix doesn’t hold within a year, we make it right.
DIY or Call Us?
Honest answer: some of this is safe to inspect, and some is not safe to attempt. You can check whether the strike plate has drifted by looking at the paint line around it. You can photograph the glass label so we can match the unit. You can note where the door drags and when it started. But glass packages on Boral windows are under tension in the sash, and a cracked pane during removal sends shards into the frame track. Hinges and operators on heavier Boral doors involve weight and alignment that’s easy to get wrong. This isn’t wear-and-tear work we recommend as a weekend project. One call to (432) 233-0976 gets a live person who can tell you over the phone whether it’s worth a visit. If it is, we schedule it around your family’s quiet hours where we can.
FAQs
In our experience, Boral insulated glass seals in San Antonio hold for 12 to 18 years on average, but west-facing windows with full afternoon sun often fail closer to the 8 to 10-year mark. The heat load on that side of the house is hard on the spacer bar. Call (432) 233-0976 if you’re seeing fog between the panes; we can tell you from the label whether the unit is still under any coverage.
Some parts can be repaired, and some are wear items meant to be swapped. A striker plate alignment or a hinge shim is a repair. A stripped crank gear or a blown glass seal is a replacement. We’ll only recommend a replacement when repair won’t last; your written estimate explains which path we’re taking and why.
Most single-hardware replacements, a hinge, a lock, a sweep, take 45 to 90 minutes on site. Glass packages take one to two hours because of the careful sash removal and cleanup. We’ll give you a window before the visit and call when we’re on the way.
We stock common Boral hardware, hinges, operators, locks, sweeps, and some weatherstripping profiles, on our San Antonio trucks. Specialty glass packages are ordered to size and usually arrive within 5 to 10 business days. If we don’t have the exact part with us, we’ll tell you before the visit so there’s no surprise.
Written by Graham Stein, Owner, Elmstead Remodeling San Antonio at Elmstead Remodeling San Antonio, serving San Antonio and nearby areas.
