Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Schertz, TX | Elmstead Remodeling San Antonio
As a Schertz General Contractor, we provide independent Ameristar cabinet installation, refacing, and repair across Schertz, TX. Our Ameristar work here differs from every other contractor because we plan around two things most outsiders miss: Schertz’s shrink-swell clay that moves slab foundations, and the city’s 9 AM school-hours noise rule that restricts demolition and heavy cutting in neighborhoods like Fairways of Schertz and Carolina Crossing. If you need Ameristar cabinetry serviced, refaced, or replaced, call (432) 233-0976 for a free estimate.
Why Schertz Residents Choose Us for Ameristar Service
We know Ameristar’s Classic Series framed boxes, Elements Series frameless cabinets, and Premium Series semi-custom lines from the inside. Graham Stein, owner of Elmstead Remodeling San Antonio, learned cabinetry the hard way: pulling apart boxes in older San Antonio homes near King William, where original detail matters and shortcuts show. That same eye now applies to every Ameristar job we take in Schertz, whether it is a single damaged drawer front in a 1978 Argyle Street ranch or a full kitchen reface in a Carolina Crossing two-story.
We are not an authorized Ameristar dealer. We are an independent Ameristar service provider, which means our repair decisions are based on field performance in Schertz, not warranty quotas. When a thermofoil door delaminates after eight years of Texas humidity, we replace it. When a drawer glide binds because the slab settled half an inch, we re-square the box before we touch hardware. Call (432) 233-0976 and we will walk you through what is actually wrong, in plain English.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in Schertz
- Thermofoil peeling at door and drawer front edges. Schertz summer humidity mixed with heat cycling from ranges and dishwashers causes Ameristar’s veneer-wrapped MDF to lift at the corners first. We see it most on Classic Series doors in kitchens without a proper range hood venting outside.
- Drawer glide and hinge bind from slab movement. Most older Schertz homes are slab-on-grade with brick veneer sitting on heavy clay. A half-inch of settlement is enough to rack an Ameristar Classic box out of square. Doors start rubbing, drawers drag. We re-square with composite shims before replacing hardware.
- Particleboard cabinet bottoms sagging under stone countertops. In 1970s and 80s Schertz ranchers, homeowners added granite or quartz without reinforcing the boxes below. Ameristar’s older particleboard decking sags under the load. We rebuild with plywood decking and add corner bracing.
- Sink base water damage from slow leaks. Schertz water is hard. Supply lines and trap connections fail slowly, and by the time a homeowner notices, the Ameristar sink base floor is swollen and rotted. We catch it on estimate walks before it spreads to the toe kick and adjacent boxes.
- Veneer delamination on Ameristar door and drawer fronts near dishwashers. Heat plus moisture escaping from the dishwasher vent breaks down the catalyst edge banding on older Ameristar thermofoil lines. Newer Elements Series parts hold better, but the old stuff peels within a decade.
Ameristar Service in Schertz: What Local Conditions Mean for Your Cabinets
Schertz sits on the eastern edge of the Balcones Escarpment, right where the dry Hill Country transitions into the wetter Blackland Prairie. That means heavy clay soils that shrink during August droughts and swell after spring rains, moving slabs in ways San Antonio homes on rockier ground seldom experience. For Ameristar cabinet owners, the telltale sign is a door that rubs only in one season, or a drawer that opens clean in March and sticks by July. We time our cabinet work around that movement. Glides and hinges get adjusted only after the box is checked for square. Shim, don’t force. Where a San Antonio crew might call a binding drawer a hardware problem, we know to look at the slab first in Schertz.
The second factor is the school-hours noise ordinance. Schertz restricts heavy equipment operation tied to school hours, which means concrete pours and loud demolition are often off-limits before 9 AM during the school year. Our crews schedule cabinet tear-out in Fairways of Schertz and Carolina Crossing early, then switch to low-noise scribe work, adhesive, and shimming while elementary students are in class. Crews from San Antonio or New Braunfels routinely blow this and get cited. We have not, because it is baked into the schedule from day one.
Last August, our crew pulled an Ameristar Classic double-bowl vanity in a 1978 Argyle Street ranch on Schertz’s east side. The right door’s thermofoil had blistered from a decade of hot water heater closet heat, and the box had pulled a quarter-inch out of square because the slab had settled toward the downspout. We re-squared the base with composite shims, replaced both doors with custom-cut thermofoil fronts matched to the original maple finish, and rebuilt the drawer box with dovetail joinery. No teardown, no new countertop, done by 2 PM before the 105-degree afternoon heat set in.
Ameristar Models & Products We Service in Schertz
We service the full Ameristar residential range: Classic Series framed cabinetry, Elements Series frameless boxes, and Premium Series semi-custom lines, plus all matching door and drawer fronts and trim. When Ameristar still produces the door or front you need, we order it. When the line has been discontinued, we cut and edge-band quality aftermarket MDF or plywood to match the original profile and finish. We keep common Ameristar fillers, hinges, and drawer glides stocked for fast Schertz turnaround, and we never tear out a full box when a single face frame or door pair will do. That said, when box sides or top rails are rotted or delaminated beyond structural repair, we say so plainly and replace what must be replaced.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Schertz
Here is what Ameristar work in Schertz typically costs, based on the job type. The written price we give you before we start is the price you pay. No change orders unless you change the scope.
| Ameristar Service | Typical Range in Schertz |
|---|---|
| Ameristar cabinet refacing (doors, drawer fronts, veneer), kitchen | $9,000 – $20,000 |
| Replace Ameristar vanity and add quartz top, bathroom | $3,500 – $8,500 |
| Ameristar single-cabinet repair with custom door/drawer front | $400 – $1,200 |
What moves the price: how many boxes are damaged, whether thermofoil needs full replacement on every front, and how much slab movement has already occurred. A single warped door is a $500 fix. A full kitchen reface with new veneer is a $14,000 project. We will tell you which one you actually need. Call (432) 233-0976 for a free estimate and a written scope of work before anything gets signed.
Serving Schertz, TX - Our Local Coverage Area
We’re based in the Schertz area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Schertz
Can you match Ameristar Classic Series cabinet doors when only one door is damaged, or do we have to replace the whole kitchen?
You can absolutely replace a single door. We match the profile, grain direction, and finish, then color-match the thermofoil or veneer to the original maple or oak tone. In most Schertz kitchens we have worked in, one or two doors are damaged while the rest of the boxes are structurally sound. Replacing one door and refinishing the surrounding faces is usually a $400 – $600 job against $9,000-plus for a full reface. Call (432) 233-0976 and we will tell you which way to go after seeing the kitchen.
Why do Ameristar cabinet doors bind more often in Schertz than in San Antonio?
Schertz sits on heavy clay at the edge of the Blackland Prairie. The clay swells after rain and shrinks in drought, moving slab foundations enough to rack cabinet boxes slightly out of square. San Antonio sits on rockier ground in many neighborhoods, so the same Ameristar box holds square longer there. In Schertz, a door that rubs or a drawer that drags is often a slab movement issue, not a hardware failure. We check the box for square before swapping glides.
Are generic aftermarket door fronts safe to use on Ameristar cabinets in a humid Schertz kitchen?
Yes, when installed properly. For discontinued Ameristar Classic and thermofoil lines, we cut and edge-band quality aftermarket MDF or plywood to match the original dimensions and finish. The key is edge banding that can handle Schertz humidity without peeling. We use heat-resistant edge banding on doors near dishwashers and ovens. A well-made aftermarket front will outlast the original thermofoil in many cases. Call (432) 233-0976 and we will show you samples.
Can you pull permits for Ameristar kitchen remodel work in Carolina Crossing while respecting the school-hours noise rule?
Yes. We pull permits for Bathroom Remodeling in Schertz and kitchen remodels in Carolina Crossing and across Schertz, and we schedule demolition, concrete cutting, and heavy material handling to comply with the city’s 9 AM school-hours noise restriction. That means tear-out happens early, then we switch to low-noise adhesive, shim, and scribe work during school hours. The permit process is part of the written scope before work starts.
Do you ever recommend replacing Ameristar particleboard cabinet boxes with plywood before countertop installation?
We do, in specific situations. If you are putting quartz or granite on Ameristar boxes from the 1970s or 80s that have sagged, water-stained, or delaminated decking, we recommend rebuilding the decking with plywood and adding corner bracing before the stone goes down. On newer Elements or Premium Series boxes that are square and dry, the original substrate is usually fine. We will tell you which applies after an inspection. Call (432) 233-0976 to schedule a look.
Service Areas Near Schertz
We serve Schertz and the surrounding corridor, including San Antonio, Converse, Live Oak, Fair Oaks Ranch, and Bulverde. For a broader view of our coverage, see our Schertz service area page. If you are outside Schertz proper, we also provide Ameristar sales & service across the region, including Ameristar service in San Antonio and Ameristar service in Fair Oaks Ranch.
Book Your Ameristar Service in Schertz Today
Write it down, price it once, do it right. That is the rule on every Ameristar job we take in Schertz. Call (432) 233-0976 to schedule your free estimate. A live person answers, day or night. We will walk your cabinets, tell you what needs fixing and what does not, and hand you a written price before a single tool leaves the truck.
Written by Graham Stein, Owner at Elmstead Remodeling San Antonio, serving Schertz with Ameristar service since 2005.
