Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The San Antonio Owner’s Guide
Tremron bathroom remodeling in San Antonio typically runs $9,000 – $28,000 installed, depending on whether we’re refreshing a guest bath or gutting a master suite down to the studs. Our crews stock Tremron-compatible trim, pans, and threshold materials on the truck for most common San Antonio homes, and we can usually have the failing section identified and priced within a single visit. Most homeowners discover the problem the hard way: a hairline crack along the Tremron shower base after a foundation shift, cracked grout lines that let water behind the tile, or a threshold that’s pulling away from the slab after years of Texas clay movement. Graham Stein will tell you the same thing he tells every San Antonio homeowner: write down what you see, because we’re going to price it once before we touch it.
Which Tremron Models This Applies To
First, a clarity point: Elmstead Remodeling San Antonio is an independent contractor, not affiliated with Tremron. We work with Tremron products because they’re built for Texas soil conditions and because San Antonio homeowners trust the name. The compatibility question comes down to two things: the part’s dimensions and the era of the original installation. Tremron bath components installed before roughly 2010 often used a thicker mortar bed and slightly different drain collar heights than current production. That matters when you’re replacing a shower pan but keeping the existing drain location. Newer Tremron lines use a 2-inch drain assembly with a compression gasket; older ones sometimes used a threaded collar. We measure both before ordering anything. For most San Antonio bathrooms built in the last 15 years, the standard 60×32 Tremron pan or 48×36 shower base drops in without relocating the drain. The bigger gotcha is threshold height: Tremron’s low-profile pans sit 4 inches off the slab, but some San Antonio homes on pier-and-beam have floor framing that shifts enough to crack a rigid pan. We check the subfloor deflection before we ever order a replacement.
Styles & brands we work with
Signs Your Tremron Bathroom Remodeling Is Failing
- Water staining on the ceiling below the bathroom. This usually means the Tremron pan’s weep holes are clogged or the drain gasket has failed. The pan itself may be fine; the seal assembly is the first thing to check.
- Grout cracking in a stair-step pattern along shower walls. San Antonio’s clay soil moves with every wet-dry cycle, and that movement telegraphs through the tile. If the crack follows the tile joints rather than crossing through tiles, it’s a movement issue, not a material failure.
- A soft spot in the floor outside the shower curb. Water has wicked past the Tremron threshold or under the pan lip. By the time you feel softness, the subfloor has been wet for months. We open it up to see how far it traveled.
- Musty odor that comes back after cleaning. Trapped moisture behind a failed Tremron wall seal feeds mildew that surface cleaning never reaches. If the smell returns within days, the waterproofing layer has a breach.
- Cracked or crumbling grout at the pan-to-wall transition. This is the most common failure we see in San Antonio homes on expansive soil. The joint fails before the tile does. We replace the sealant with a Tremron-compatible flexible joint rated for the movement your slab experiences.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In San Antonio, a Tremron shower pan replacement with drain assembly and waterproofing runs $3,000 – $8,500 as a standalone job. A full Tremron bathroom remodel, including pan, wall tile, vanity, and fixtures, lands between $9,000 and $28,000 depending on square footage and what we’re opening up. The range is driven by three things: the size of the wet area, whether we’re replacing the subfloor or just refinishing over it, and your fixture choices from Kohler, Moen, or Grohe. Every quote includes the written material list with brand names, the labor to remove and reset the old components, and our 365-Day Done Right Promise: if it’s not done right after we leave, we come back and make it right. There’s no change order that appears after demo day. The price you sign is the price you pay.
DIY or Call Us?
What you can safely do yourself: take photos of the failing area from three angles, check whether the crack runs through the tile or only through the grout, and shut off the water to that bathroom if you suspect a leak. What we’d caution against: cutting into a Tremron pan or wall assembly yourself. There’s a waterproofing membrane behind the tile, and once that’s compromised, the repair cost multiplies. If the failure involves the drain collar or any part of the waterproofing layer, call us at (432) 233-0976 after you’ve taken photos. We’ll walk you through what we’re seeing and schedule a time to put eyes on it. There’s no charge for the estimate, and no pressure to move on it that day.
FAQs
A properly installed Tremron pan typically lasts 20 – 30 years in San Antonio, but the sealant at the pan-to-wall joint usually needs attention every 5 – 7 years because of our soil movement. The pan itself rarely fails; the waterproofing around it does. Call (432) 233-0976 if you’re seeing grout cracks at the transition, and we’ll tell you honestly whether it’s a reseal job or a full replacement.
Hairline surface cracks can sometimes be sealed with a Tremron-compatible epoxy, but any crack that goes through the pan’s structural layer means replacement. We’ll assess it on-site and show you what we’re seeing before recommending either path. If it’s repairable, we’ll tell you that and price the repair as a repair, not a replacement.
Most single-pan replacements take 2 – 3 working days from the first cut to the final shower test, including dry time for the waterproofing layers. If we’re doing a full bathroom remodel, it’s 1 – 3 weeks depending on scope. Before we start, we give you a written schedule that names the days we’ll be in your home and what happens on each one.
We stock the most common Tremron pans, drain assemblies, and threshold trims on our trucks, and we keep a running inventory of sealants rated for San Antonio’s clay-soil movement. For non-standard sizes or older production runs, we order directly and give you the lead time in writing before any work is scheduled. Call (432) 233-0976 and we’ll check stock for your specific dimensions while you’re on the line.
We also work with KraftMaid cabinetry, Cambria and Silestone countertops in the same bathrooms, so your Tremron components and your vanity and surface choices come together under one written price. If you’ve got a Tremron shower pan or bath component that’s failing, call Graham and the Elmstead Remodeling San Antonio crew at (432) 233-0976. We’ll come out, measure, write it down, and price it once. Drop cloths go down on the floors, shoe covers go on at the door, and the clean-up photo comes before the final invoice. Write it down, price it once, do it right.
Written by Graham Stein, Owner, Elmstead Remodeling San Antonio at Elmstead Remodeling San Antonio, serving San Antonio and nearby areas.
