Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Kitchen Remodeling: The San Antonio Owner’s Guide
When an ActiveYards kitchen component wears out or fails in San Antonio, we match the part, price the work in writing, and complete the repair or replacement without guesswork. Most ActiveYards kitchen remodeling projects in San Antonio run between $14,000 and $45,000 installed, depending on cabinet configuration, countertop material, and whether we’re addressing one section or the entire kitchen. Homeowners typically discover a failing component during daily use: a drawer that catches, a hinge that sags, or a finish that has clouded from years of San Antonio heat and hard water.
Elmstead Remodeling San Antonio is an independent remodeling contractor, not a dealer or affiliate of ActiveYards. That matters because our loyalty is to the homeowner and the outcome, not to moving a specific product line at retail. We carry and install ActiveYards-compatible components, and we’re equally comfortable working alongside KraftMaid cabinetry, Cambria or Silestone countertops when the project calls for it.
Key takeaways:
- Written price before any work starts, every time, no exceptions.
- Genuine ActiveYards components or quality equivalents we stand behind.
- Drop cloths, shoe covers, and a photo of the clean-up before we leave.
- 365-Day Done Right Promise on every completed project.
Which ActiveYards Models This Applies To
ActiveYards manufactures modular cabinet and outdoor kitchen systems, and the most common failure points we see in San Antonio kitchens are cabinet box connectors, drawer slides, hinges, and adjustable leg assemblies. ActiveYards cabinetry uses a modular frame system with specific connector widths and clip profiles. Before ordering any replacement, we verify the cabinet series and the fastener pattern on the existing box. Some ActiveYards lines built in the last decade use a cam-lock connector that older or off-brand replacements will not seat into correctly.
The fastest way to identify your ActiveYards component is to check the manufacturer label inside the cabinet door frame or on the bottom of a drawer box. There will usually be a series designation like the ActiveYards Classic or a line name specific to the product family. If the label is gone or worn past reading, we measure connector spacing, box depth, and hinge bore diameter and match from there. In many cases, a quality aftermarket hinge or slide with the same bore pattern and throw works as well as the OEM part and costs less. When the project involves a structural component or anything visible on the cabinet face, we default to ActiveYards factory parts so the finish and profile stay consistent.
Our trucks in San Antonio carry common ActiveYards-compatible drawer slides, soft-close hinges, shelf clips, and leg levelers. Less common pieces we order and usually have in hand within a few days.
Styles & brands we work with
Signs Your ActiveYards Kitchen Remodeling Is Failing
- Drawer sticks or binds halfway: The slide has lost its ball bearing retainer or the rail has warped from years of San Antonio summer heat cycling. Forcing it strips the mounting screws and scores the cabinet face.
- Door sags and drags on the cabinet frame: A hinge cup is worn or the plate screws have pulled loose from the particleboard. There is usually just enough flex left to keep using the door, but it will eventually crack the hinge plate.
- Cabinet frame connector has loosened near a sink or dishwasher: Moisture from San Antonio’s hard water and high humidity softens the board around the cam-lock. The corner starts to separate and the box loses its square.
- Soft-close no longer closes: The damper inside the hinge or slide has failed. The door still works but slams hard enough to knock items inside the cabinet.
- Shelving is sagging in the middle: A span is overloaded or the shelf clips lost tension. ActiveYards shelving is engineered for specific spans, and moving clips around without checking that is how most shelf failures happen.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A complete ActiveYards kitchen remodel in San Antonio falls between $14,000 and $45,000 depending on the size of the kitchen, whether cabinet boxes are being replaced or refaced, and which countertop material you choose. Smaller scoped work costs less: cabinet installation alone typically falls between $4,000 and $13,000, countertop installation between $2,000 and $6,500, and a kitchen island between $3,000 and $10,000. Every quote we write includes the specific part numbers or material names, labor, and clean-up as separate line items.
| Scope of Work | San Antonio Installed Range |
|---|---|
| Complete ActiveYards Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
The price we hand you on paper before the first tool leaves the truck is the price you pay. Graham Stein writes every scope of work down, line by line, and no line items get added after demo day. If something changes because of what we find inside the wall or under the existing cabinetry, we stop, walk you through it, and write a new number for your approval before any additional work starts.
Every completed project carries the 365-Day Done Right Promise. If something is not right after we finish, we make it right.
DIY or Call Us?
You can safely check whether a hinge plate has pulled loose or whether a drawer slide is merely dirty. Cabinet work is not high-tension work, but the fasteners, alignment, and finish matching will punish a hasty fix. We see drawers that got a generic big-box slide screwed over the original rail, which throws the face off and drags the drawer out of square. We see hinges replaced with the wrong bore depth that split the door panel.
The active failure mode on ActiveYards modular cabinets is the connector system, and if one corner of a box is out, the whole run shifts. Forcing it back into place without re-clipping the cam-lock damages the board the cam-lock seats into. If you want to check the label, take a photo, or note which drawer feels wrong, that is helpful. Then call (432) 233-0976 for an honest assessment and a written number before any work begins.
FAQs
With normal San Antonio conditions, the boxes and faces last 20 to 25 years and the soft-close hardware typically runs 8 to 12 years before dampers and slides need replacement. Heat and humidity extremes shorten hardware life compared to cooler climates. Call (432) 233-0976 and we’ll assess what’s actually worn versus what only looks worn.
Yes, and we usually try the repair first. Slides, hinges, shelf clips, and leg levelers are repair items. A moisture-damaged box or a cracked face frame is usually a replacement because the board itself is the failure. We’ll show you the difference on the walkthrough before you spend a dollar.
A hardware and slide refresh runs a day or two. A full cabinet and countertop replacement in San Antonio runs roughly 3 to 6 weeks, and the timeline depends on permitting, material lead times, and the scope of plumbing and electrical we touch. We respect quiet hours and work around nap time and school schedules where possible.
We stock common soft-close hinges, drawer slides, shelf clips, and leg levelers on our San Antonio trucks. Special-order ActiveYards cabinet boxes or matched door faces arrive within a few days, and we schedule the work so you are not living without a drawer or door longer than necessary. Call (432) 233-0976 and ask what we have on the truck for your line.
Written by Graham Stein, Owner, Elmstead Remodeling San Antonio at Elmstead Remodeling San Antonio, serving San Antonio and nearby areas.
