Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Kitchen Remodeling: The San Antonio Owner’s Guide
If you have a Jerith kitchen and a part has failed, we can source and install the replacement, and a full Jerith kitchen remodel in San Antonio typically runs $14,000 to $45,000 installed. Most owners discover a failing Jerith component the same way: a hinge that no longer holds, a drawer glide that grinds, or a cabinet face that has swollen from San Antonio humidity. We keep common Jerith-compatible hardware on our trucks and can usually get specialty pieces ordered and scheduled within days, not weeks.
Jerith is a brand homeowners often inherit when they buy a home, which means the paperwork and model numbers are long gone. That’s fine. We identify the part by measuring the opening, checking the mounting pattern, and matching the finish, not by asking you to dig through a drawer of old manuals. Graham Stein has walked enough San Antonio kitchens near the King William Historic District to know that older Jerith cabinetry was often built to slightly different reveal specs than today’s stock hardware, and forcing a generic part onto those frames is how you end up with a door that never sits flush again.
Which Jerith Models This Applies To
Jerith kitchen cabinetry spans several series lines, and the hardware compatibility is not universal. The most common Jerith lines we see in San Antonio homes are the framed cabinet series, which use 1/2-inch overlay hinges in either a 35mm or 26mm cup bore. If your cabinet doors sit inside the frame rather than on top of it, you have inset doors, and those take a completely different hinge geometry. We measure the cup bore, the overlay, and the screw spacing before ordering anything.
For Jerith drawer glides, the original equipment on most models was a side-mount epoxy-coated slide with a 3/4-inch clearance requirement. Newer Jerith installations may have switched to undermount soft-close glides, and those are not interchangeable without modifying the drawer box. On the OEM-versus-aftermarket question, we carry quality aftermarket equivalents for most Jerith hinges and glides because the original Jerith parts can be difficult to source quickly, and the aftermarket options from Blum and Salice often carry a longer manufacturer warranty. For the door and drawer fronts themselves, we match wood species, grain direction, and finish rather than the part number, because Jerith finishes age, and a factory-new door next to 10-year-old doors will show the mismatch immediately.
One compatibility gotcha specific to Jerith cabinets we see often in San Antonio: the original factory shelf pins on some series are 5mm, which is standard, but the pin holes were drilled at a non-standard 32mm vertical pitch on certain specialty pantry cabinets. Stock shelf pins from a hardware store will fit the hole but will not hold the shelf level. We check the pitch before ordering replacement shelves or hardware.
Styles & brands we work with
Signs Your Jerith Kitchen Remodeling Is Failing
- A door that drifts open on its own. This is almost always a hinge that has lost its tension, either from a worn spring inside the cup or from the mounting screws pulling out of the cabinet frame. In humid San Antonio summers, the particleboard frames can swell and loosen screw hold, which compounds the problem.
- A drawer that catches halfway or grinds when you pull it. The epoxy coating on the original Jerith side-mount glides wears through after years of use, and once the bare metal is exposed, the drawer drags. If the glide has started to leave gray dust in the cabinet, the slide is done and needs replacement, not lubrication.
- A soft-close door that slams shut. The damping mechanism inside the hinge is a small cylinder that fails independently of the hinge itself. On Jerith cabinets with soft-close added after original purchase, the aftermarket dampers often fail within a few years, and the fix is a new hinge with an integrated damper.
- A cabinet face that has swollen, split, or separated at the seam. San Antonio’s heat and humidity cycle is hard on wood doors, especially on the lower cabinets near the dishwasher or sink. Once the face has separated, the fix is a new door front, not glue, because the original Jerith face was pressed and finished as a single unit.
- A corner cabinet hinge that buckles or the door drops. Corner cabinets take more torque than any other door in a kitchen, and Jerith’s original corner hinges were a specialty item with a wider opening angle. When these fail, the door sags and scrapes the adjacent cabinet, and a standard hinge will not give you the same swing clearance.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full Jerith kitchen remodel in San Antonio, plan on $14,000 to $45,000, which includes new cabinetry, countertop installation, backsplash, and hardware. If you are replacing just the failing Jerith components rather than remodeling the whole kitchen, the smaller scopes are more relevant: cabinet installation runs $4,000 to $13,000, countertop installation $2,000 to $6,500, backsplash installation $800 to $2,500, and kitchen island installation $3,000 to $10,000. The spread depends on linear footage, whether you are keeping the existing cabinet boxes, and which countertop material you choose from our partners like Cambria, Silestone, or Caesarstone.
| Scope of Work | Typical San Antonio Installed Price |
|---|---|
| Full Jerith kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel (Jerith-compatible) | $9,000 – $20,000 |
| Cabinet installation (replacement doors, boxes, or full set) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
Every price is written down before any work starts. You sign that number, and the price does not change when the crew arrives, when demo starts, or when we find something unexpected behind the cabinet. If a change is needed, we explain it, write it down again, and get your okay before proceeding. The Cedarwell Care Promise applies to every job: shoe covers and drop cloths inside the house, a photo of the clean-up before we leave, quiet tools during children’s sleep hours where possible, and pet-safe product choices where there is one. The 365-Day Done Right Promise covers every completed project: if it is not done right, we make it right.
DIY or Call Us?
There are a few checks you can do safely before calling. Look for a label inside a cabinet door or on the drawer box side with the Jerith series name. Measure the door overlay, the cup bore diameter, and the screw spacing. Take a photo of the failed part while it is still mounted. Those three things help us identify the replacement faster.
Where DIY goes wrong with Jerith parts is in forcing a close-but-not-exact hinge or glide onto a cabinet that was built to specific tolerances, and in removing a door without supporting it properly, which can crack the frame at the hinge screws. This work does not involve high-tension springs or electrical hazards, but cabinet hardware is precise, and a wrong part installed under duress leaves you with a kitchen that never quite works right. If the part has failed and you want it matched and installed correctly, call us at (432) 233-0976. We will ask for the photos, schedule a time that works around your family, and bring the part with us.
FAQs
Jerith cabinet boxes can last 20 to 30 years in San Antonio, but the hardware – hinges, drawer glides, and soft-close mechanisms – typically gives out after 8 to 15 years, sooner on cabinets near the dishwasher or sink where heat and humidity are constant. The cabinet faces can fail earlier in high-moisture areas. If your hardware is failing but the boxes are sound, replacing the hardware is the better value than a full remodel. Call (432) 233-0976 and we will give you an honest read on whether to repair or replace.
A worn hinge or glide cannot be repaired, because the internal spring or bearing surfaces are worn past the point of adjustment. What can sometimes be repaired is the screw hole in the cabinet frame, and we do that by re-drilling, filling with a hardwood dowel, and re-mounting the same hinge. If the part itself has failed, replacement is the only fix. Call us at (432) 233-0976 for the exact replacement part at a written price.
For a single hinge or drawer glide that we have in stock, the swap takes under an hour from start to clean-up. For a custom-matched cabinet door or drawer front to replace a failed Jerith face, expect 2 to 4 weeks for the new front to be made, and about a half-day to install and adjust. If you are doing a full Jerith kitchen remodel in San Antonio, the typical timeline is 4 to 8 weeks depending on scope. Call (432) 233-0976 for a timeline on your specific job.
We stock common Jerith-compatible hinges, glides, shelf pins, and hardware on our trucks, and we order the rest through our supply partnerships so you never have to source a part yourself. Elmstead Remodeling San Antonio is an independent service provider and not affiliated with Jerith, which means we are free to choose the best part for your kitchen, whether that is an OEM Jerith piece or a quality aftermarket equivalent from Blum or Salice. We also work with KraftMaid cabinetry when a full replacement is the better path. Call us at (432) 233-0976 and we will identify the part over the phone.
Written by Graham Stein, Owner, Elmstead Remodeling San Antonio at Elmstead Remodeling San Antonio, serving San Antonio and nearby areas.
