Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Bathroom Remodeling: The San Antonio Owner’s Guide
PGT bathroom remodeling in San Antonio typically runs $9,000 to $28,000 installed, depending on the size of the bathroom, the fixtures you choose, and whether we’re replacing a tub with a walk-in shower or keeping the existing footprint. We install PGT-compatible bathroom systems and components, and we stock the common trim kits, glass panels, and hardware on our trucks so a failed part doesn’t leave your bathroom out of commission longer than it has to. Most owners call us after they notice water seeping past a shower door seal, a handle that spins without engaging, or glass that has started to haze despite regular cleaning.
If you’re reading this, chances are you already know which part failed. What you need now is a straight answer on cost, timing, and whether it makes sense to repair or replace. We’ll walk you through that below. Our team at Elmstead Remodeling San Antonio has worked on bathrooms across the city, from newer builds in Stone Oak to older homes near the King William Historic District where original framing and plumbing don’t always follow modern conventions.
- Installed price range in San Antonio: $9,000 – $28,000 for a full PGT bathroom remodel
- We stock: common PGT-compatible glass panels, hinges, handles, and seal kits on the truck
- Written price before any work starts: always included, never optional
- 365-Day Done Right Promise: if it’s not done right, we make it right
Which PGT Models This Applies To
PGT makes several lines of shower enclosures and bathroom glass systems, and the part you need depends on which one you have. The PGT 3000 series, 5000 series, and the newer CLR (Clear) line all use different hinge profiles and handle offsets, which means a handle for a 3000 series won’t necessarily seat correctly on a 5000 series panel. If you can still read the label etched in the corner of the glass or on the hinge plate, that serial prefix tells us exactly which parts we need. If the label is gone, we measure the glass thickness, hinge spread, and handle hole spacing on site.
For PGT specifically, we default to OEM parts when they’re available and not backordered. The OEM glass carries the factory tempering certification and thickness spec. For hardware like hinges, handles, and seals, quality aftermarket equivalents from Kohler and Moen lines often fit the same cutouts at a lower price than the PGT-branded part, and we’ll show you both options on the written quote so you decide. One compatibility gotcha we see often in San Antonio: PGT panels from before 2015 used different hinge geometry than current production, so a “universal” hinge from a big-box store won’t hold the door square. That’s a common source of doors that sag and scrape a month after a DIY fix.
Elmstead Remodeling San Antonio is an independent remodeling contractor and is not affiliated with PGT. We also stock and install parts for KraftMaid, Cambria, and Silestone product lines where the bathroom includes their cabinetry or countertops.
Styles & brands we work with
Signs Your PGT Bathroom Remodeling Is Failing
- Water pooling outside the shower door after every use. This almost always comes down to a failed bottom sweep or a hinge that has loosened enough to let the door drop a few millimeters. The sweep compresses over time in San Antonio’s hard water, which accelerates wear on the vinyl or rubber edge.
- A handle that spins without engaging the latch. The internal square drive inside the handle has stripped, or the set screw backed out. It’s a small part, but leaving it means someone eventually gets locked in or out, and the handle itself can scratch the glass when it rotates freely.
- Glass that looks cloudy even right after cleaning. Hard water deposits from San Antonio’s limestone-heavy supply etch the glass surface over time. Once the etching is deep enough, no cleaning product restores it. The panel needs replacement or a professional glass polish, depending on severity.
- Hinges that creak loudly or feel gritty when the door moves. Minerals build up inside the hinge barrel, or the internal bushing has worn through. Left alone, the hinge eventually binds and transfers stress to the glass, which is how panels crack at the attachment point.
- Visible rust or green corrosion on any metal component. That’s a sign of a cheap aftermarket part or a failed finish. In a humid bathroom with hard water, a failed finish means the structural metal underneath is next, and that’s the failure that takes the glass with it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full PGT bathroom remodel in San Antonio runs $9,000 to $28,000. The spread comes down to footprint and finish level. A small bathroom remodel in the $5,000 to $12,000 range covers a standard five-foot tub surround, one shower door, vanity, and basic tile. A larger walk-in shower installation lands at $4,500 to $12,000 on its own, and when you add custom glass, a free-standing tub, and higher-end fixtures from Kohler or Grohe, you’re in the upper end of the full-bath range.
For a part-level repair, like replacing a PGT shower door or a failed hinge assembly, the job is priced by the part plus labor, and we show you the line items before anything gets started. You’ll see the part cost, the labor, and any disposal fee as separate entries. No estimates that grow after the crew arrives. The written price you sign is the price you pay. Every repair carries the same 365-Day Done Right Promise we put on full remodels: if it’s not done right, we make it right.
DIY or Call Us?
There are a few things you can safely do before calling: check whether the hinge screws are loose, look for a visible crack in the sweep, and snap a photo of the label or hinge plate so we can identify the part before we arrive. Tightening a set screw is fine. Replacing a bottom sweep is usually a five-minute job if you have the right profile.
Where DIY goes wrong is with tempered glass panels and hinge alignment. Tempered glass fails catastrophically when pressure is applied unevenly, and a panel that’s been scored or chipped during a removal attempt can shatter. The glass weighs more than it looks like it should, and a drop in a tight San Antonio bathroom means broken glass, damaged tile, and often a cut. If the part involves lifting the glass, call us at (432) 233-0976. If it’s just a handle or a sweep, we’re happy to walk you through the check on the phone and send the part if that’s all you need.
FAQs
With the hard water in San Antonio, you can expect 10 to 15 years from the glass and hardware before the seals compress, hinges wear, or the glass etches to the point where replacement makes more sense than repair. The frame and glass generally outlast the moving parts, so you’ll likely replace hinges and sweeps two or three times before the panel itself needs to go. Call (432) 233-0976 for an exact assessment of your setup.
In many cases, yes. Hinges, handles, sweeps, and seals are all serviceable parts, and we repair them far more often than we replace entire panels. The glass itself is the exception: once it’s etched, cracked, or chipped, repair isn’t safe or practical, and replacement is the right call. We’ll tell you which situation you’re in before we propose any work, and the written quote shows the repair price beside the replacement price so you can compare.
A single part like a hinge or sweep is usually a same-day fix once we have the part in hand, and we stock the most common profiles on our trucks. A full bathroom remodel in San Antonio typically runs 2 to 4 weeks depending on scope, with the glass installation happening after the tile and fixtures are set. We’ll give you a written schedule before we start, and we work around your family’s quiet hours where we can.
We stock common PGT-compatible hinges, handles, sweeps, and seal kits on our trucks, which covers most repair calls the same day. For glass panels and less common hardware, we order from our supplier network and typically have the part in hand within a week. If you’re not sure which part you need, call (432) 233-0976 and we’ll help you identify it from the label or a photo.
Write it down, price it once, do it right. If you have a PGT bathroom part that’s failed, call (432) 233-0976 and we’ll walk you through what you’re looking at before any work is scheduled. The estimate is free, the written price is the price you pay, and the 365-Day Done Right Promise stays on the job after we leave.
Written by Graham Stein, Owner, Elmstead Remodeling San Antonio at Elmstead Remodeling San Antonio, serving San Antonio and nearby areas.
