Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The San Antonio Owner’s Guide
If you’re searching for Boral roofing in San Antonio, you likely have a cracked tile, a slipped barrel, or a section of your Boral roof that’s no longer keeping water out. We stock Boral-compatible roofing materials and install them throughout San Antonio, with most single-tile or small-section repairs running $600 – $2,500 depending on roof height, tile profile, and how many tiles need pulling. You’ll usually notice the problem the morning after a Hill Country windstorm: a tile shard in the yard near the downspout, a dark water mark on the garage ceiling, or a gap along the ridge where a barrel tile used to sit.
Which Boral Models This Applies To
Boral manufactures several roofing profiles, and the compatibility details matter more than most homeowners expect. The main product lines we work with across San Antonio are Boral Concrete Roof Tile (the most common), Boral Clay Roof Tile, and the Boral Saxony Slate profile, which shows up on a lot of newer upscale builds in Alamo Heights and Stone Oak. Each profile has a different interlocking geometry: a Saxony tile will not seat correctly against a standard flat concrete tile, even if the color looks close. The fastest way to identify your tile is the stamp on the underside, but on older roofs that stamp has often weathered away. When it has, we match by measuring the tile’s width, water channel depth, and nose profile against current Boral production specs.
On the OEM-versus-aftermarket decision: for visible field tiles, we recommend staying with genuine Boral or a documented Boral-compatible equivalent. The color match and water-channel geometry matter, and a slightly-off aftermarket tile will be visible from the street. For hidden components like battens, underlayment, and flashing, quality aftermarket products from GAF and similar manufacturers perform just as well and are what we use when the project permits.
Styles & brands we work with
Signs Your Boral Roofing Is Failing
- Tile shards in the yard after a storm. San Antonio gets the occasional microburst and hail event, and concrete and clay tiles that take a direct hit will crack or shear. A shard near the foundation line usually means the tile above it is compromised. Walk the perimeter and look up before you assume it was just debris.
- Dark streaks running down from the roofline. On clay tile especially, a cracked tile lets water run under the adjacent tiles and down the fascia. By the time it streaks, the underlayment underneath is already wet and the repair is no longer a single-tile swap. Underlayment replacement is part of what we quote, not an afterthought.
- A tile sitting slightly askew or lifted at one corner. San Antonio’s heat expansion cycles work the nails and clips that hold roof tiles. A tile that has lifted even a half-inch is no longer locked into the water channel, which means water runs sideways into the roof deck during the next rain. This is the most common failure we see in neighborhoods like Terrell Hills and Olmos Park.
- Sandy grit collecting in the gutters. Concrete tiles shed fine material as they age, but a sudden increase in gutter grit tells you the tile surface is spalling faster than it should. Left alone, spalling reduces the tile’s thickness and eventually cracks it from thermal stress alone.
- Visible fasteners at the ridge or hip lines. When the ridge tiles shift, you’ll see the nails or clips that used to be hidden. San Antonio’s high winds work ridge caps loose slowly, and a loose ridge cap is an open invitation for water at the roof’s most vulnerable seam.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Boral tile roof repair in San Antonio, the installed price typically falls between $600 and $2,500. A single cracked flat tile on a one-story roof with easy ladder access sits at the bottom of that range. A repair involving ten or more barrel tiles, ridge cap work, and two-story access in a neighborhood like Monte Vista or King William will land at the top. The written price we give you before any work starts includes the tiles, the fasteners and clips, the underlayment repair if the deck has been exposed, the drop cloths we lay down along your walkway, and the photo of the clean-up we take before the crew leaves. That price is the price you pay. No line items appear after the job begins. Our 365-Day Done Right Promise covers the repair: if anything we touched fails within a year, we come back and make it right.
DIY or Call Us?
What a homeowner can safely check: walk the yard after a storm and look for shards, check the gutters for unusual grit, and look for lifted or missing tiles from the ground with a pair of binoculars. That ground-level inspection tells you whether a repair is needed and helps you describe the problem accurately on the phone. What we don’t recommend: walking a Boral tile roof without the right equipment and experience. Tile roofs in San Antonio get slick with morning dew, the tiles crack under concentrated foot pressure, and a fall from even a one-story roofline changes a $600 repair into a hospital visit. The tiles also interlock in a specific order; if you pull the wrong tile first, you’ll loosen the three around it. We’d rather you call us at (432) 233-0976 and let us do the walking. The estimate is free, and so is the advice.
FAQs
A properly installed Boral concrete or clay tile roof typically lasts 50 – 70 years in San Antonio’s climate, though the underlayment underneath usually needs replacing every 20 – 30 years, and individual tiles will crack and shift with weather events over time. The tile itself rarely wears out; it’s the flashing, fasteners, and underlayment that age. If your underlayment has failed, the repair is more involved than a tile swap, and the written quote will lay that out before any work starts. Call (432) 233-0976 for an exact assessment of your roof’s condition.
A hairline crack in a concrete tile can sometimes be sealed and stabilized in place, but in our experience, a cracked tile on a San Antonio roof is usually a swap-out job because the crack will spread with the next freeze-thaw or hail event. Sealing is a stopgap, not a fix. If you’re unsure, send us a photo of the tile in question and we’ll tell you straight whether it’s a repair or a replacement. Estimates are free.
A single-tile replacement typically takes one to two hours from ladder-up to clean-up, and a multi-tile repair with ridge work is usually a half-day job in San Antonio. The time depends on roof access, the number of tiles, and whether the underlayment has been compromised. We’ll give you a clear time window with the written price so you know what to expect. Call (432) 233-0976 to schedule your free estimate.
Yes, we keep Boral-compatible flat concrete, barrel profile, and Saxony Slate tiles on the truck for common San Antonio repairs, and we can source less common profiles and colors from our local suppliers within a day or two. Every Elmstead Remodeling San Antonio job is an independent Boral-compatible service, not a Boral factory program, so your warranty comes from the manufacturer on the materials and from our 365-Day Done Right Promise on the work. Call (432) 233-0976 and a live person will answer, not a voicemail box.
Written by Graham Stein, Owner, Elmstead Remodeling San Antonio at Elmstead Remodeling San Antonio, serving San Antonio and nearby areas.
