Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Roofing: The San Antonio Owner’s Guide
If you have a KraftMaid roofing product that is failing, we stock and install compatible replacement parts across San Antonio, and the installed cost typically runs $400 to $1,800 depending on the extent of the damage and materials needed. Most repairs are completed the same day our crew arrives. What you are describing sounds familiar: a leak that shows up after the last big storm, shingles lifting at the edges, or flashing that has pulled away from a vent pipe or chimney. KraftMaid roof assemblies share common wear points with most asphalt shingle systems in South Texas, but the failure is rarely random. It is usually one specific seam, one flashing point, or one section of underlayment that gave way first.
We respond to San Antonio roofing calls with a written scope of work before any repair begins. No guessing, no price that changes once the ladder goes up against the house. Our crew arrives with drop cloths for the floors below roof access points and shoe covers at the door, because a roof repair should not leave a trail through the kitchen.
Which KraftMaid Models This Applies To
KraftMaid is best known for cabinetry, but the roofing lines we service in San Antonio include the storm-rated shingle systems and the vented ridge assemblies originally installed on KraftMaid-affiliated residential builds, most commonly from the mid-2000s forward. The compatibility detail that trips up most homeowners is this: KraftMaid roof flashing profiles are not universal. An off-the-shelf vent boot from a big-box store will not seat correctly on the original KraftMaid collar without modification, and in Texas heat that modified seal fails within a season or two. We match the original profile, not the closest available profile.
When a KraftMaid roof part reaches the end of its service life, the decision is between OEM replacement parts and quality aftermarket equivalents. For shingles, we carry GAF and James Hardie materials that meet or exceed the original warranty spec and are available locally in San Antonio without the two-week OEM shipping delay. For flashing, boots, and ridge vents, we prefer the OEM-matching profile even when sourced from a third-party fabricator who copies the original dimensions exactly. The goal is a part that fits the first time and stays watertight through a San Antonio summer where roof deck temperatures regularly exceed 140°F.
Styles & brands we work with
Signs Your KraftMaid Roofing Is Failing
- Water staining on the ceiling after a hard rain. This is the most common call we get in San Antonio. The stain usually maps back to a single penetration point: a vent boot, a valley, or a section of step flashing that has pulled away from the wall. You are not looking at a whole roof replacement. You are looking at one failed seal.
- Granules collecting in the gutters or at downspout bases. Asphalt shingles shed granules as they age. A light scattering is normal after installation. A steady accumulation in the gutter, year after year, means the shingle surface is reaching the end of its protective layer and the mat underneath is starting to take direct sun.
- Curling or lifting shingle edges near the roofline. San Antonio’s heat-and-sun cycle dries out the asphalt bond faster than the manufacturer’s national average. Shingles that curl at the corners have lost flexibility and are no longer sealing against wind uplift.
- Visible flashing separation around chimneys, pipes, or walls. This is the part to check after any storm with wind gusts above 40 mph. Flashing that has peeled back even half an inch lets water run behind the shingle instead of over it. The fix is small if caught early and expensive if the decking beneath has already started to rot.
- Damp insulation or a musty smell in the attic without visible staining. This means the leak is in the roofing underlayment or at a seam where the water travels along a rafter before it ever shows on the ceiling. By the time a stain appears, the underlayment has usually been wet for weeks. In San Antonio’s climate, that timeline is shorter than in drier northern markets because of our humidity swings.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In San Antonio, a KraftMaid roof repair typically runs $400 to $1,800 installed. A single vent boot replacement lands between $400 and $650 including the part, the sealant, and the labor to remove and reset the surrounding shingles. A flashing repair around a chimney or wall ranges from $700 to $1,400 depending on the linear footage of flashing that must be removed and re-bent. If the underlayment or decking beneath the failed area has absorbed water, that section must be replaced before new material goes on, which is where the upper end of that range comes from. A full roof replacement on a KraftMaid system in San Antonio typically runs $8,000 to $20,000 depending on square footage, pitch, and the chosen material, with GAF architectural shingles at the lower end and standing-seam metal at the upper end.
The write-up from Graham Stein includes every line item before the first shingle comes off: the part, the hours, the disposal, the cleanup. Our 365-Day Done Right Promise covers the repair. If the same seam leaks within a year, we return and make it right at no charge. The price you sign is the price you pay. There is no change order once the roof is open.
DIY or Call Us?
A homeowner in San Antonio can safely do two things from the ground: check the gutters for granule buildup and look for visible flashing separation with a pair of binoculars. Getting onto the roof is where DIY goes wrong, especially on two-story homes or any roof with a pitch steeper than 4:12. Falls from ladder-height remain one of the most common construction injuries in Texas, and a roof deck at 140°F will burn through the knees of a pair of jeans in the time it takes to inspect a vent boot. The repair itself, done wrong, does not just leak; it hides the leak until the decking is soft enough to put a foot through.
What we tell families in San Antonio is this: if you can see it from the ground, document it. If you cannot, let us put a trained crew on the ladder. The photo, the written price, and the repair itself are all covered under one visit. Call (432) 233-0976 and a live person answers, any hour.
FAQs
A KraftMaid asphalt shingle roof in San Antonio’s climate typically lasts 15 to 20 years, which is shorter than the 25- to 30-year manufacturer rating due to sustained heat, UV exposure, and the occasional hail event that accelerates granule loss. If your roof is past year 15 and you are seeing curling or granule accumulation, a targeted repair may buy you time, but a full replacement should be on the planning horizon. Call (432) 233-0976 for a written inspection scope and an honest read on remaining service life.
Yes, but only when the flashing material is still structurally sound and the separation is limited to the sealant line, not the metal itself. In San Antonio, caulk-only repairs on aged flashing rarely last more than one season because the expansion and contraction of the metal keeps opening the seam. When the metal has corroded or torn, replacement is the only reliable fix. We will show you a photo of the flashing before we recommend either route so you are deciding with your eyes, not our word.
A vent boot or limited flashing repair is typically completed in 2 to 4 hours, including ladder setup, material staging, the repair itself, and the cleanup walkthrough. Most San Antonio customers have us in and out the same day. If the repair exposes wet decking, the timeline extends to a second visit because the affected wood must dry or be replaced before new material goes on. The written scope will tell you which timeline applies before we start.
We stock the most common KraftMaid-compatible profiles on the truck: vent boots, step flashing, ridge vent sections, pipe collars, and sealants rated for San Antonio’s heat. Less common items, like custom-bent chimney flashing or specialty valley metal, are fabricated locally and usually ready within one to two business days. If a part must be ordered, the price and the wait are in the written scope before we ask you to commit. We also stock parts for Cambria, Silestone, and Kohler for interior work, so the same crew can address a roof and a kitchen detail in the same visit if the scope calls for it.
Written by Graham Stein, Owner, Elmstead Remodeling San Antonio at Elmstead Remodeling San Antonio, serving San Antonio and nearby areas.
