Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in San Antonio, TX | Elmstead Remodeling San Antonio
We’re Elmstead Remodeling San Antonio, and we provide independent Dvele construction service as our General Contractor in San Antonio across the city and surrounding Hill Country. We service the steel chassis, the factory-sealed envelope, the integrated low-voltage systems, and the interior finishes of Dvele homes, with a written price before any work starts. What makes our Dvele work different here is limestone. San Antonio sits on shallow, hard bedrock, and Dvele homes on terraced lots need more than a parts swap: they need someone who understands how the frame, the footing, and the factory tolerances behave after they meet Texas clay and rock. Call (432) 233-0976 for a free estimate.
Why San Antonio Residents Choose Us for Dvele Service
Dvele homes are not like ordinary site-built houses. The chassis is steel, the panels arrive factory-set, and the wiring runs through proprietary low-voltage control systems that carry lighting, shading, and HVAC automation. When one of those systems fails, a standard remodeler is guessing. Our crew has serviced multiple Eco-Chassis-equipped Dvele homes, including a Passive House-spec panel repair near King William that a modular dealer turned away. Graham Stein, our owner, learned construction at Los Angeles Trade-Technical College and spent decades framing and finishing before he started writing scopes of work that families can actually hold in their hands. He insists on that here: Dvele sales & service begins with a written price, not a verbal estimate that grows after demo day. We carry genuine Dvele parts for structural and integrated systems, and we know which local suppliers stock code-standard electrical supplies when a lead time would leave your family waiting.
Styles & brands we work with
Common Dvele Construction Problems We Solve in San Antonio
- Envelope breaches at roof-to-wall transitions. Dvele’s factory-sealed seams are precise, but San Antonio’s freeze-thaw cycles after hard rain can stress those transitions and let moisture hide behind the panel. We inspect and re-seal using genuine Dvele flashing strips, not generic caulk.
- Proprietary low-voltage wiring degrading in attic heat. Texas summers bake attics past 140 degrees. Dvele control wiring can become brittle years earlier than it would in a cooler climate, causing lighting and HVAC scenes to drop out. We trace, test, and replace those circuits without disturbing the panel finish.
- Panel seams telegraphing through drywall. Expansive clay soil shrinks and swells under San Antonio slabs. When the steel chassis shifts, ultra-tight Dvele panel seams can show through the drywall as hairline ridges. We re-level the chassis before we touch the finish work.
- PoE camera and sensor lines failing after lightning or utility surges. Spring storms roll through San Antonio with real lightning. Hard-wired Dvele sensor lines can short and take the automation with them. We isolate the surge point and repair the circuit.
- Exterior wood cladding cupping and splitting. Cedar and thermally modified wood look right on a Dvele, but San Antonio’s UV and low-humidity summers pull moisture out of the boards fast. We replace cupped sections and re-seal to match the original factory color.
Dvele Service in San Antonio: What Local Conditions Mean for Your Equipment
Many Dvele homes in San Antonio are sited on terraced lots in areas like Elm Creek and Timberwood Park, and that changes how we approach every repair. The factory sets panel tolerances to within millimeters, assuming the chassis will sit flat. But limestone-ledged terrain here settles unevenly, and bedrock can sit just a foot below the surface in places like Alamo Heights or Terrell Hills. When we arrive at a Dvele home on a terraced lot, the first thing we verify is whether the steel frame has moved since it left the factory. A quarter-inch of settling under one corner will pull panel seams out of alignment, bind interior doors, and stress the roof-to-wall flashing. We shim the chassis, re-verify the panel gaps against the manufacturer’s spec, and then address what the movement caused. That sequencing matters. Skip it, and you will be re-trimming drywall every summer. This is the only page you will find that explains Dvele troubleshooting in terms of San Antonio’s expansive clay and shallow limestone together, not one or the other.
Dvele Models & Products We Service in San Antonio
We work on the full Dvele lineup: Dvele IQ Prefab Homes, DveleIQ, Dvele Linea, and Dvele Terra. For structural components, panel sealing, and integrated control systems, we use genuine Dvele parts, period. Those systems are too tightly engineered for aftermarket substitutions. For code-standard electrical supplies, surface finishes, and standard plumbing fixtures, we source locally when a Dvele part is backordered, so a two-week lead time does not turn into a two-month project. We keep common flashing profiles and low-voltage connectors stocked for faster San Antonio turnaround, and when a part has to ship from the manufacturer, we tell you the date before we order it. In Terrell Hills, our techs re-leveled a Dvele Linea on a shifting slab by shimming the chassis and replacing the proprietary roof flashing strips, then restored a failed automated shading circuit that had shorted from a lightning surge. The homeowner got the house back in one visit.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in San Antonio
Every Dvele project gets a written price before any work starts. Here is what the work typically runs in San Antonio, based on the scope and your home’s condition.
| Service | Typical Range in San Antonio |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
| Tile Roof Repair | $600 – $2,500 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives cost on a Dvele project is whether the chassis needs re-leveling, whether the integrated systems need re-wiring, and how much of the factory finish has to be matched. Our free estimate includes a written scope, a line-item price, and a list of the exact materials we will use. Call (432) 233-0976 to schedule yours.
Serving San Antonio, TX - Our Local Coverage Area
We’re based in the San Antonio area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in San Antonio
How does San Antonio’s expansive clay soil affect a Dvele home’s steel chassis over time?
Expansive clay shrinks during drought and swells after rain, which causes uneven movement under the slab. On a Dvele, that movement transfers directly to the steel chassis, and the factory-set panel tolerances can be thrown off by a fraction of an inch. That is when you see hairline drywall ridges, doors that stick, or roof seams that open slightly. We re-level the chassis with shims and verify panel gaps against manufacturer spec before any finish repair. Call (432) 233-0976 if you are seeing those signs, and we will put it in writing.
Can you match Dvele’s custom interior panel finishes during Bathroom Remodeling - San Antonio or another local remodel?
Yes. We match Dvele’s panel profiles and paint or veneer finishes by working from the original factory sample and the home’s as-built documentation. When a panel is discontinued, we have it custom-cut locally and finished to blend with the surrounding panels. The goal is that you cannot tell where the repair ends and the original panel begins.
What should we do if our Dvele roof starts leaking at a seam after a hail storm?
Cover the interior if water is coming through, take photos, and call us at (432) 233-0976. Dvele roof-to-wall transitions are factory-sealed, and hail can break that seal without leaving obvious shingle damage. We inspect the flashing strips, identify the seam that opened, and replace the proprietary Dvele flashing rather than smearing sealant over the gap. The estimate is free, and we will write down exactly what we find.
Are Dvele’s integrated smart home controls reliable in Texas heat?
They are engineered systems, but San Antonio attic heat accelerates wear on low-voltage control wiring. We see more failures in Dvele homes here than the manufacturer’s baseline would predict, mostly in lighting and HVAC automation circuits. The fix is usually a targeted re-wire of the degraded circuit, not a full system replacement. We test the entire control run before we quote anything.
Do you handle structural retrofits for Dvele homes on steep San Antonio lots?
We do. Terracing and limestone ledge create settlement patterns that need both structural and envelope work. That means shimming the chassis, re-anchoring it where movement occurred, and then repairing the panel seams and flashing that shifted. We pull permits, schedule inspections, and document everything. Call (432) 233-0976 for a written scope and price before any work begins.
Service Areas Near San Antonio
Our Dvele service covers San Antonio and the surrounding communities, including Schertz, Fair Oaks Ranch, Bulverde, Converse, and Live Oak. If you are in San Antonio service area coverage, we can schedule your estimate this week. We also provide Dvele service in Schertz and Dvele service in Fair Oaks Ranch for families who want factory-spec repairs without driving into the city.
Book Your Dvele Service in San Antonio Today
Write it down, price it once, do it right. That is how we run every Dvele project in San Antonio. Call (432) 233-0976 and we will walk your home, check the chassis, inspect the envelope, and hand you a written estimate before anything else happens. A live person answers the phone, and the estimate is free.
Written by Graham Stein, Owner at Elmstead Remodeling San Antonio, serving San Antonio since 2005.
