Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Antonio Homeowners Choose Jerith Construction
We’re an independent San Antonio remodeling and construction crew that services Jerith aluminum fencing and gates, and the answer to “who fixes Jerith fences in San Antonio?” is simpler than most people expect. You don’t need a manufacturer-authorized dealer to get a Jerith fence repaired correctly. You need a crew that has taken apart enough of these fences to know exactly which pickets, brackets, hinges, and post caps behave the way Jerith designed them, and which ones fail in our specific heat, limestone, and storm conditions. That’s us. Call (432) 233-0976 to schedule a free estimate for Jerith fence repair or installation anywhere in the San Antonio area.
We should be direct about one thing from the start: Elmstead Remodeling San Antonio is not affiliated with or authorized by Jerith. We are an independent San Antonio Jerith service provider. Our expertise comes from years of working on Jerith Residential Aluminum Fence, the Jerith Estate Collection, Jerith Industrial Grade Fence, and the Jerith Pet Fence Series across San Antonio, from Alamo Heights to Stone Oak to Terrell Hills. We know these fences at the component level. We know what the manufacturer’s installation guide doesn’t tell you about San Antonio clay soil, UV exposure, and those spring microbursts that tear pickets out of rails.
Why Trust Elmstead Remodeling San Antonio for Your Jerith Construction?
Most fence repair crews in San Antonio can hang a gate. Very few can tell you, before they ever touch the post, that the sag on your Jerith Estate Collection gate is probably a stripped hinge screw in the thin aluminum post wall, not a bent hinge or a warped gate frame. That distinction matters because it changes the repair from a $400 gate replacement to a $60 hinge re-anchor with stainless self-tapping screws and an internal reinforcement sleeve. Our owner, Graham Stein, learned construction at Los Angeles Trade-Technical College and spent decades framing and finishing before bringing that same eye for component-level failure to San Antonio fences. When you call us about a Jerith fence problem, the first conversation is diagnostic, not a sales pitch. Write it down, price it once, do it right.
Every Jerith service call begins with a written scope of work. You sign a price before a single tool leaves the truck. That written price is the price you pay. There are no line items added after we start. Our crew shows up with shoe covers and drop cloths for any indoor access, and we photograph the site before and after so there’s no question about how the work was left. The 365-Day Done Right Promise applies to every Jerith repair and installation we complete. If it’s not done right, we make it right.
We also stock a rotating inventory of common Jerith parts locally in San Antonio: black and bronze pickets, horizontal rail sections, post caps, hinge sets, and the locking tabs that many original installers skip. Skipped locking tabs are one of the most common reasons Jerith pickets pop out after a Texas thunderstorm. We know what to look for because we’ve fixed it hundreds of times.
Styles & brands we work with
Common Jerith Construction Problems We Fix in San Antonio
These are the specific failure modes we see on Jerith aluminum fencing in San Antonio. Some are design realities. Some are installation shortcuts from the original crew. All of them are fixable without replacing an entire fence run.
- Powder coat chalking and fading on south-facing runs. Jerith’s powder coat finish is solid, but San Antonio’s UV intensity breaks down the resin in the topcoat on south and west-facing panels faster than the manufacturer’s typical lifespan charts suggest. The fence turns chalky and the color dulls, especially in dark bronze and black finishes. We can often restore a faded Jerith fence with a color-matched, UV-stabilized recoat rather than replacing panels. If the metal underneath is sound, the fence doesn’t need to go.
- Gate sag from stripped hinge screws in the thin aluminum post walls. This is the single most common Jerith gate failure we see in San Antonio. The post wall is thin. The original installer drove self-tapping screws into it. Over a few years of gate cycles and wind, those screws strip loose. The gate drops and drags on the latch. We fix this with stainless self-tapping screws driven into internal reinforcement sleeves, not just bigger screws in the same stripped holes.
- Pickets popping out of horizontal rails after high winds. Jerith pickets are designed to lock into the horizontal rails with small locking tabs. When an original installer skips those tabs, or when high winds flex the rail enough to pop the tabs loose, pickets go flying. We rebuild the rail-to-picket connection and replace missing locking tabs on every panel in the affected area, not just the one that failed.
- Bottom rail corrosion at the concrete post bases. San Antonio sprinkler overspray and heavy rain pool water where the bottom rail meets the concrete footing. That standing water sits against aluminum long enough to break down the finish and start corrosion. We add bottom rail drain holes and reposition sprinkler heads where possible, so water stops pooling. For corroded sections, we sleeve and re-lock where the structure is sound, and recommend panel replacement only where the aluminum itself has thinned too far to hold a connection safely.
- Post shifting in clay soil during drought and freeze-thaw cycles. San Antonio’s expansive clay soil shrinks hard during summer drought and swells after rain. That movement slowly works fence posts out of plumb, which cascades into gate alignment problems and rail stress. We reset posts in proper depth and footing material, and for fences in the rockier parts of town, like Terrell Hills where bedrock sits a foot below grade, we adjust the footing approach to what the ground actually allows.
Jerith Parts & Our Repair-vs-Replace Approach
We use genuine Jerith replacement pickets and brackets when the design profile requires an exact match. Jerith’s residential picket profiles are specific enough that a generic replacement picket would be visibly wrong. When the OEM part is backordered, we source high-quality powder-coated extruded aluminum that matches the Jerith color code, and we tell you that’s what we’re doing before we do it. There is no guessing and no “close enough” without your sign-off.
Our repair-vs-replace standard is honest. If a gate frame is square and the structure is sound, we’re not going to sell you a new gate. We’ll fix the hinge connection, the sag, or the latch and call it done. If a post is corroded through at the base, we’ll tell you whether a sleeve repair will hold or whether the post needs to come out. When a section is structurally compromised, a full panel replacement is sometimes the only safe choice. We will show you the damage and explain the decision before we write the quote. Call (432) 233-0976 for an exact assessment.
Our Jerith Service Process – Step by Step
- 1
Diagnosis and written scope. We walk the fence line with you. We look at the hinges, the picket-to-rail connections, the post bases, the footings, and the gate alignment. We write down exactly what we’ll do, what parts we’ll use, and what it will cost. You sign that document before any work starts.
- 2
Parts sourcing and prep. We pull parts from our local San Antonio stock where possible. If we need a specific Jerith profile or color match that isn’t in stock, we order it and schedule the work only once the parts are in hand. No partial starts, no open-ended timelines.
- 3
Repair or installation. We do the work with drop cloths and shoe covers where indoor access is needed. We use quiet tools during rest hours where possible. We ask before moving anything. For fence work, we’re careful with your landscaping, your irrigation lines, and your neighbor’s property line.
- 4
Testing and walkthrough. We open and close the gate. We push on the pickets. We photograph the finished work, including the clean-up. If you’re not satisfied, you tell us before we leave, not after.
- 5
Warranty and follow-up. Every Jerith repair and installation carries our 365-Day Done Right Promise. If something isn’t right after the job is complete, we make it right. No new quote, no negotiation.
See the difference
Before
After
Before
After
Before
AfterJerith Products We Service & Install in San Antonio
We service and install the full core Jerith lineup in San Antonio, including Schertz Jerith service for the Jerith Residential Aluminum Fence, the Jerith Estate Collection, Jerith Industrial Grade Fence, and the Jerith Pet Fence Series. That means we handle residential and light commercial aluminum fencing, gates, and post-and-rail assemblies. We also work on Jerith gate hardware, latches, and hinges. Our local parts stock in San Antonio covers the most common residential profiles and finish colors: black, bronze, and white. For less common finishes, we color-match through our powder coating partner.
We can also install new Jerith fencing, but we’re most often called in to repair, extend, or re-anchor existing Jerith runs. If you’re adding a section to match an aging Jerith fence, talk to us before buying materials. We can tell you what will match and what won’t.
We Also Service These Brands
Jerith is one of several brands we know at the component level. Our San Antonio crews also work on construction and remodeling with materials from KraftMaid cabinets, Cambria and Silestone countertops, and Kohler fixtures. If your project involves a fence plus a kitchen or bath, we can handle the full scope with one written price and one crew.
Our crew rebuilt a 70-foot Jerith Estate Collection fence in Stone Oak last month after a microburst tore three pickets out of their rails and left the gate dragging on the latch, a typical Jerith Construction in Fair Oaks Ranch, TX repair scenario. We sourced matching black posts, reset the gate hinges with stainless self-tapping screws into internal reinforcement sleeves, and added bottom rail drain holes to prevent future pooling. The customer now has a gate that swings true and pickets that won’t pop loose in the next thunderstorm. That’s the kind of work we want our name on in San Antonio.
FAQs – Jerith Construction Service in San Antonio
In most cases, yes. Jerith finishes are applied in standard color codes, and we match those codes rather than eyeballing a swatch. For older fences where the powder coat has faded, we can also blend the new section to match the faded appearance. Call (432) 233-0976 and we’ll assess your fence in person.
Almost certainly not. Gate sag on Jerith fences is usually caused by stripped hinge screws in the thin aluminum post wall, not a bent gate frame. We re-anchor the hinges with stainless self-tapping screws and internal reinforcement sleeves. Most sagging Jerith gates are fixed in an afternoon for a fraction of what a new gate costs.
The most common reason we see in San Antonio is that the original installer skipped the small locking tabs that hold each picket into the horizontal rail. High winds flex the rail enough to pop the unsecured pickets loose. We rebuild the connection and add locking tabs to the entire affected area. That’s the fix that actually prevents recurrence, not just reinserting the picket.
You can, but we’ll talk through what you’re actually saving. Different manufacturers use different picket profiles, post dimensions, and finish codes. A different brand next to an existing Jerith run is usually visible up close, and the connection points don’t always mate cleanly. We’ll give you the pricing for both a true Jerith match and a quality alternative, and let you decide with the numbers in front of you.
No. If the corrosion is localized to the base and the post above it is still structurally sound, we can sleeve the bottom of the post, re-set it in the footing, and add drain holes to stop future water pooling. Full post replacement is only necessary when the corrosion has thinned the aluminum to the point that a sleeve won’t hold. We’ll show you the extent of the damage before we write the quote.
Aluminum fence installation typically runs $4,000 to $10,000 depending on the linear footage, gate count, and soil conditions. Vinyl fence installation runs $3,500 to $9,000. Gutter and downspout replacement, which often accompanies fence and outdoor projects, runs $1,200 to $4,500. All prices are written before any work starts. Call (432) 233-0976 for a free estimate.
| Service | Price Range (San Antonio) |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Gutter & Downspout Replacement | $1,200 – $4,500 |
Ranges reflect typical San Antonio market pricing for standard residential projects. Your exact price is written down before any work starts.
Book Your Jerith Service in San Antonio, TX
We’re ready to look at your Jerith fence. Call (432) 233-0976 to schedule a free estimate in San Antonio. Graham Stein will walk the fence line with you, write down the scope, and give you a price you can sign before the work begins. No surprises. No open-ended estimates. Just a fence that’s done right.
Written by Graham Stein, Owner at Elmstead Remodeling San Antonio, serving San Antonio since 2005.
