Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Custom Window & Door Order Cost in San Antonio?
Custom window and door orders in San Antonio typically run $8,000 to $25,000 for a full-home window replacement, while a single custom entry door with sidelights generally lands between $3,500 and $9,000. A complete package of custom windows plus a front door on a 2,000-square-foot home in Alamo Heights or Stone Oak usually falls in the $12,000 to $30,000 range. These figures reflect 2026 material costs, San Antonio labor rates, and the energy-efficiency upgrades now standard in Texas Hill Country homes. Call (432) 233-0976 for a written price on your specific opening sizes and product choices.
Custom Window & Door Order Cost Breakdown (2026)
Every window and door order in San Antonio starts with a measurement visit, then moves to product selection, fabrication, and installation. Here is what families in neighborhoods from Terrell Hills to Helotes are paying in 2026, broken down by scope:
| Project Scope | Typical Price Range |
|---|---|
| Single custom entry door (fiberglass or steel, no sidelights) | $2,500 – $5,500 |
| Custom entry door with one or two sidelights | $3,500 – $9,000 |
| Custom French door or sliding patio door, full assembly | $4,000 – $11,000 |
| Custom window, single unit (wood, fiberglass, or vinyl) | $800 – $2,200 per window |
| Whole-home window replacement, 10 – 15 windows | $8,000 – $25,000 |
| Impact-rated custom windows, whole home | $15,000 – $40,000 |
| Full custom window package plus entry door (2,000 sq ft home) | $12,000 – $30,000 |
| Custom door with transom window and custom millwork | $5,000 – $12,000 |
What moves the number up or down? The material you choose is the single biggest driver. A custom fiberglass entry door costs less than a solid mahogany door with hand-finished millwork, and a vinyl window costs less than a wood-clad window with a factory-applied finish. The number of openings matters too. Ten standard double-hung windows cost less than three oversized picture windows with custom grille patterns. San Antonio’s climate also plays a role: homes built before 1990 often have non-standard rough openings, which means the crew is trimming, shimming, and sometimes reframing rather than doing a slide-in replacement. That labor shows up in the written price, and we explain it line by line before any work starts.
What Affects Custom Window & Door Order Pricing in San Antonio
- Material and manufacturer. Fiberglass and vinyl cost less than wood or wood-clad. Brands like Marvin, Andersen, and Pella are available through San Antonio suppliers, and each carries a different per-unit price point. We show you the manufacturer’s name and warranty before you commit.
- Window and door dimensions. A standard 36-by-80 entry door is one price. A 72-by-96 custom opening with a transom is another. Oversized units require more material, more glass, and sometimes structural support that standard sizes do not.
- Glass package and energy rating. Low-E coatings, argon gas fill, and double or triple glazing add cost per unit. In San Antonio, where summer attic temperatures regularly pass 140 degrees, a Low-E package pays for itself in cooling costs within a few years. We walk through the energy label with you so the choice is a real decision, not a checkbox.
- Labor and finish work. Removing a door that has been in place since the Nixon administration is different from swapping a unit that was installed last decade. Rotted jambs, out-of-square rough openings, and older homes in King William with original millwork all change the labor line. We name that work in the written price, and we do not surprise you with it later.
- Permit and code requirements. The City of San Antonio requires permits for structural changes to exterior openings. Window and door replacement that does not alter the opening size sometimes falls under different rules. We handle the paperwork, and the permit fee appears as its own line item on your written price.
- Finish and hardware selections. A builder-grade lockset is one price. Emtek or Baldwin hardware with custom finishes is another. The same goes for interior casing, exterior trim, and paint-grade versus stain-grade materials. You pick the hardware, and we show the price difference before you decide.
How to Save on Custom Window & Door Order
You do not have to compromise on named-brand materials to keep the project reasonable. A few honest ways San Antonio families reduce cost without cutting corners:
- Group the work. Replacing all windows on one side of the house at once costs less per unit than doing three now and four later. The crew is already mobilized, the permit is pulled once, and the manufacturer may offer per-unit discounts at higher quantities.
- Choose mid-tier manufacturers. Marvin and Andersen make excellent windows, but there are also strong mid-tier fiberglass and vinyl lines from Milgard and Simonton that deliver real San Antonio energy performance at a lower per-unit price. We can show you three options at three price points and explain the warranty difference in plain English.
- Phase the project. If the budget is tight, we can sequence the work: entry door and front-facing windows this year, remaining windows next spring. The written price for each phase is locked before that phase begins, so you are never guessing what phase two will cost.
- Keep standard sizes where you can. Custom window and door orders in San Antonio often involve at least one non-standard opening, but every opening you can keep at a standard rough dimension saves fabrication cost and lead time. We measure everything first and tell you where a standard unit works and where it does not.
- Ask about the free estimate. Every Elmstead Remodeling San Antonio project includes a written price before any work starts. There is no charge for the measurement visit or the written quote, and the number we give you is the number on the contract. Call (432) 233-0976 to schedule a walk-through.
Custom Window & Door Order vs. Standard Replacement in San Antonio
Some San Antonio homes do not need custom fabrication at all. If your rough openings are standard and the existing frames are square and dry, a stock replacement window from a quality manufacturer may serve you perfectly well for less money. But homes built in the 1950s in Jefferson or the 1970s in Castle Hills often have dimensions that no stock unit fits, and the choice is not really between custom and standard, it is between custom and a sloppy install with oversized trim hiding the gaps.
We tell you which situation you are in before you spend a dollar. Graham Stein, who leads Elmstead Remodeling San Antonio, walks every window and door project through the same process: measure first, show the options second, write the price third. If a standard unit will do the job without compromise, we will say so. If custom is the right call for your home, we will explain exactly why and what it costs. Either way, the decision is yours and the price is in writing before any work begins.
Why Window and Door Install Quality Matters More Than Price
A window is only as good as its installation. San Antonio’s summer storms, high humidity, and intense sun will find a poorly flashed opening within a season or two. We see it in older North Side homes all the time: water stains under the sill, swollen casing, drywall damage creeping down from the corner of a window that was installed years ago without proper flashing tape or backer rod.
Here is what our crew does on every window and door order, and you will see it in the written price because we name it there:
- Remove the old unit and inspect the rough opening for rot, moisture, or insect damage before anything new goes in.
- Flash the opening with manufacturer-specified tape at the sill and jambs, not just caulk around the exterior trim.
- Level and shim the new unit so it operates smoothly on day one and keeps operating smoothly in year ten.
- Insulate the perimeter with low-expansion foam, not the cheapest can on the shelf.
- Caulk the exterior with a product rated for Texas UV exposure, then reinstall trim and casing.
- Haul away the old windows, doors, packaging, and job-site debris. The floor is swept, and a photo of the clean-up is taken before the crew leaves.
That last part is not a courtesy. It is part of the Cedarwell Care Promise: shoe covers and drop cloths inside the house, a written price before any work starts, a photo of the clean-up before the crew leaves, quiet tools during family rest hours where possible, and pet-safe product choices where available. Families with kids and dogs should not have to choose between new windows and a house they can live in during the project.
Custom Window & Door Order Timeline in San Antonio
Most custom window and door orders in San Antonio take 4 to 8 weeks from signed contract to installation. Here is what that timeline looks like in practice:
- Week 1: Measurement visit. We measure every opening, check for square, inspect for rot or moisture, and photograph the existing conditions. No charge for this visit.
- Week 1 – 2: Product selection. You choose the manufacturer, material, glass package, finish, and hardware. We give you the written price based on those exact selections. If you want to change a selection, we update the price in writing before you sign.
- Week 2 – 6: Fabrication. The manufacturer builds your windows and doors to the dimensions we ordered. This is the longest part of the process, and it is driven by the factory, not by us. We confirm the lead time when you place the order and keep you updated if it shifts.
- Week 6 – 8: Installation. The crew arrives with shoe covers and drop cloths, works through the openings one by one, and leaves the house clean. Most whole-home window installations take 2 to 4 working days, depending on the number of openings and the condition of the framing.
If you need a door replaced quickly for security or weather reasons, call (432) 233-0976 and ask about stock options that can be installed within a few weeks while your custom door is being fabricated. A live person answers the phone 24/7, not a voicemail box.
Custom Window & Door Order and the 365-Day Done Right Promise
Every Elmstead Remodeling San Antonio window and door project carries the 365-Day Done Right Promise. If the window sticks, the door does not latch, the caulk fails, or the hardware does not hold up within a year of installation, we come back and fix it. Not because we are obligated to by a warranty clause, but because the job is not done until it is done right, and we put that promise on paper for every project we complete.
That promise sits alongside the manufacturer warranties on the products themselves. When you choose windows from a named brand, the warranty travels with the finished project, and you can verify it independently. We will hand you the paperwork, not just tell you it exists.
FAQs – Custom Window & Door Order Cost
How much does a custom front door cost in San Antonio?
A custom entry door in San Antonio typically costs $2,500 to $5,500 for a single fiberglass or steel door without sidelights, and $3,500 to $9,000 with sidelights or a transom. Solid wood doors and doors with custom millwork run higher. Call (432) 233-0976 for an exact written quote. Estimates are free.
Is it cheaper to repair or replace a custom window in San Antonio?
Repairing a window, such as replacing a broken sash or failed seal, costs $150 to $800 in San Antonio, while a full replacement unit runs $800 to $2,200 per window. If the frame is sound and the problem is isolated to the glass or hardware, repair is usually the better financial choice. If the frame is rotted or out of square, replacement is the honest answer. We will tell you which path makes sense for your window, and the written quote reflects that advice.
Can you install custom windows and doors the same week I call?
Custom fabrication typically takes 4 to 6 weeks from order to installation in San Antonio. Stock replacement units can sometimes be installed within 2 to 3 weeks, and select stock doors may be available sooner. If you have an urgent situation, call Custom Window & Door Order in San Antonio: What to Ask Before You Sign
We have walked enough San Antonio window and door projects to know what families should ask any contractor before signing a contract. Here is the list we would want answered if it were our own house: You can ask Graham Stein and the Elmstead Remodeling San Antonio team any of these questions on the phone, any time. If you are considering a Custom Window & Door Order in San Antonio, start with a measurement visit and a written price. There is no charge and no obligation. Elmstead Remodeling is a Cedarwell company founded in 2005, and the San Antonio location is independently owned and operated. That means we hold to the same Cedarwell Care Promise standards as every Elmstead location, while remaining accountable to the families in our own community. Graham Stein leads the San Antonio team, and he answers the phone like he answers a neighbor’s question: directly, honestly, and without a sales script. We are a general contracting and remodeling company. We do kitchen remodeling, bathroom remodeling, whole-home remodeling, and custom window and door orders in San Antonio. When a project calls for cabinetry, countertops, fixtures, or building materials, we work with partners including KraftMaid, Wellborn, Cambria, Silestone, Kohler, Moen, Grohe, Schluter, and James Hardie. Those are brands you can research by name, and their warranties travel with your finished project. On every job, from a single entry door to a whole-home window package, the same rules apply: a written price before any work starts, drop cloths and shoe covers inside the house, quiet tools during family rest hours where possible, pet-safe product choices where available, and a photo of the clean-up before the crew leaves. We do not consider those extras. We consider them the minimum standard for working in someone’s home. For a free estimate on custom windows and doors in San Antonio, call (432) 233-0976. A live person answers, day or night. From Terrell Hills to Alamo Ranch, from Stone Oak to Southtown, we measure, we quote, and we write the price before any work begins. If you are still in the research phase, our home page has more about how we work and what we build. Pricing reflects the San Antonio market as of 2026. Elmstead Remodeling San Antonio offers free estimates – call (432) 233-0976. Written by Graham Stein, Owner at Elmstead Remodeling San Antonio, serving San Antonio since 2005.
What Sets Elmstead Remodeling San Antonio Apart
What Our Customers Say
"Kitchen and living room refresh. Shoes off, floors covered, cleanup every evening. They checked with us before any change. Treated our home with real care."
- Dwight Harmon"Kitchen and living room refresh. What stood out was the respect for our home, shoes off, floors covered, cleanup every evening. They checked with us before any change. Beautiful result."
- Dontae Willis"They opened up our kitchen and controlled the dust better than I thought possible. Floors protected, a photo of the cleaned space each day. Gentle on the house and on budget."
- Yasmin Croft
